Product Information
The Fluke 87V MAX True-RMS Digital Multimeter | Fluke contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long days, the 87V MAX was designed to help you finish the most on a work site. It features a unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment; using true-rms ac voltage and current for accurate measurements on non-linear signals.
Fluke’s most rugged digital multimeter
The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you.
4-meter Drop tested
- Industrial-strength is no joke, the meter is designed to survive drops up to 4-meters (13 feet).
Withstands hot and cold environments
- Rely on accurate measurements with the extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C.
Easy-to-read measurements
The large display digits and 2-level bright, white backlight and backlit keypad buttons make for increased visibility. Along with the high resolution 19,999 count display mode allows you to read measurements easily in any work environment. This multimeter will run for up to 800 hours of battery life and offers measurement capabilities
- up to 1000 V ac and dc and up to 10 A (20 A for 30 seconds),
- frequency to 200 kHz
- min/max/average recording, plus 250 μs Peak min-max to capture variations automatically or
- use the built-in thermometer.
- Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
- Waterproof, dustproof IP67 case for the most extreme work sites
- Premium TL175 TwistGuard™ test leads
- Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments
| Electrical Specifications | ||
| DC Voltage | Range | 0.1 mV to 1000 V |
| Accuracy | ±(0.05% + 1) | |
| Maximum resolution | 0.1 mV | |
| AC Voltage | Range | 0.1 mV to 1000 V |
| Accuracy | ±(0.7% + 4) true-rms | |
| AC bandwidth | 20 kHz with low pass filter; 3 dB @ 1 kHz | |
| Maximum resolution | 0.1 mV | |
| DC Current | Range | 0.1 μA to 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(0.2% + 2) | |
| Maximum resolution | 0.1 µA | |
| AC Current | Range | 0.1 μA to 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(1.0% + 2) true-rms | |
| Maximum resolution | 0.1 µA | |
| Resistance | Range | 0.1 Ω to 50 MΩ |
| Accuracy | ±(0.2% + 1) | |
| Maximum resolution | 0.1 Ω | |
| Capacitance | Range | 0.01 nF to 9999 μF |
| Accuracy | ±(1% + 2) | |
| Maximum resolution | 0.01 nF | |
| Frequency | Range | 0.5 Hz to 199.99 kHz |
| Accuracy | ±(0.005% + 1) | |
| Maximum resolution | 0.01 Hz | |
| Duty cycle | Maximum duty cycle | 99.9% |
| Accuracy | ±(0.2% per kHz + 0.1%) | |
| Maximum resolution | 0.1% | |
| Temperature measurement range | –200.0 °C to 1090 °C –328.0 °F to 1994.0 °F excluding probe |
|
| 80 BK temperature probe | –40.0 °C to 260 °C, ± 2.2 °C or 2% whichever is greater –40.0 °F to 500 °F, ± 4.0 °F or 2% whichever is greater |
|
| Conductance | Maximum conductance | 60.00 nS |
| Accuracy | ±(1.0% + 10) | |
| Maximum resolution | 0.01 nS | |
| Diode test | Range | 2 V |
| Resolution | 0.001V | |
| Accuracy | ±(1% + 1) | |
| Diagnostics and data storage | Peak Min/Max | 250 μS |
| Min/Max/Avg | Yes | |
| Reading hold/Auto (Touch) Hold | Yes | |
| Relative reference | Yes | |
| Display | Digital | 6000 counts updates 4/second 19,999 counts in high–resolution mode |
| Analog bar graph | 32 segments, updates 40/second | |
| Backlight | Two level | |
| Low pass filter (VFD measurements) | Yes | |
| Input Alert™ | Yes | |
| Safety Specifications | ||
| Safety rating | IEC61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V |
|
| Agency approvals | CE, CSA | |
| Mechanical and General Specifications | ||
| IP rating | IEC 60529: IP67 | |
| Power | Three AA batteries. 800 hours typical, without backlight | |
| Size | 6.0 x 10.1 x 21.5 cm (with holster) | |
| Weight | 698.5 g (with holster) | |
| Warranty | Limited lifetime | |
| Environmental Specifications | ||
| Operating temperature | -15 °C to 55 °C, to -40 °C for 20 minutes when taken from 20 °C | |
| Storage temperature | -40 °C to + 60 °C | |
| Humidity (without condensation) | 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) |
|
| Operating altitude | 2000 m | |
Cases and holsters (8)
- Fluke C101 Hard Case
- Fluke C125 Meter Case
- Fluke C550 Tool Bag
- Fluke CXT80 Extreme Case
- Fluke C115 Soft Carrying Case
- Fluke C37XT Protective EVA Hard Tool Case
- Fluke C25 Large Soft Case for DMMs
- Fluke C35 Soft Carrying Case
- Fluke TL175 TwistGuard™ Test Leads
- Fluke TL220 SureGrip™ Industrial Test Lead Set
- Fluke TLK-225 SureGrip Master Accessory Set
- Fluke TL223 SureGrip™ Electrical Test Lead Set
- Fluke TL224 SureGrip™ Insulated Test Leads
- Fluke AC220 SureGrip™ Alligator Clips
- Fluke AC285 SureGrip™ Alligator Clips
- Fluke TL75 Hard Point™ Test Lead Set
- Fluke TL71 Premium Test Lead Set
- Fluke TLK-220 SureGrip™ Industrial Test Lead Kit
- Fluke TP220 SureGrip™ Industrial Test Probes
- Fluke TP1 Slim Reach Test Probes
- Fluke TL175-HV CAT III 1500 V TwistGuard™ Test Leads
- Fluke LVD2 Non-Contact Voltage Tester
- Fluke L206 Deluxe LED Hat Light
- Fluke i1010 AC/DC Current Clamp
- Fluke i200 AC Current Clamp
- Fluke i2000 Flex AC Current Clamp
- Fluke i400 AC Current Clamp
- Fluke i410 AC/DC Current Clamp
- Fluke 80K-15 High Voltage Probe
- Fluke 80K-40 High Voltage Probe
- Fluke 80PK-1 Bead Probe
- Fluke 80PK-27 SureGrip™ Industrial Surface Temperature Probe
- Fluke 80PK-3A Surface Probe
- Fluke 80PK-8 Pipe Clamp Temperature Probe
- Fluke 80PK-9 General Purpose Probe
- Fluke 80T-150UA Universal Temperature Probe
For more information click here