PicoLog 1000 Series
Sku: PIC-LOG1000-S
Price: R4579,30 – R7213,95
Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications
Product Information
A DISTINGUISHED PEDIGREE
The PicoLog 1000 Series is the result of a distinguished lineage that goes back to the release of our first multichannel data logger — the ADC-11 — in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low–cost way to measure and record multiple signals. The PicoLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we’ve also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.)
AN EXPANDABLE MULTICHANNEL DATA ACQUISITION SYSTEM
The budget model PicoLog 1012 has 12 input channels and 10 bit resolution. The powerful PicoLog 1216 has 16 channels and 12 bit resolution. Need more channels? No problem. Using PicoLog you can connect up to 4 Pico data loggers to one PC — giving you a potential 64 channel PicoLog 1000 Series data acquisition system, or the ability to use your PicoLog 1000 logger with other devices such as the USB TC-08 Thermocouple Data Logger.
OPTIONAL TERMINAL BOARD
The optional terminal board has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can fit resistors to offset and extend the input ranges of the logger.
FAST AND ACCURATE
With 10 or 12-bit resolution and multiple sampling modes, a PicoLog 1000 Series logger will meet your data logging needs. The PicoLog 1000 Series has 3 sampling modes: Streaming mode allows channel voltage readings to be logged continuously at up to 100 kS/s, while block mode captures up to the full 1 MS/s sample rate of the logger for a duration limited by the 8000 sample buffer, both these speeds applying to single-channel operation. The PicoLog application provides an extra mode, real-time continuous sampling, which provides averaged, time-accurate readings with automatic measurements at up to 1 kS/s on any number of channels.
Multichannel data acquisition (DAQ)
- Up to 16 input channels per data logger
- Up to 4 output channels per data logger
- Use up to 20 data loggers at the same time
- Up to 1 MS/s sample rate
- USB connected and powered
- Data acquisition software and SDK included
PicoLog 1000 Specifications
| Inputs | ||
|---|---|---|
| Model | PicoLog 1012 | PicoLog 1216 |
| Maximum sampling rate Continuous streaming Real-time continuous |
1 kS/s per channel in PicoLog, 100 kS/s shared by all channels using the supplied SDK 1 kS/s or greater 1 MS/s single-channel |
|
| Buffer memory | 8000 samples, shared by all channels | |
| Analog inputs | 12#2 | 16#2 |
| Analog bandwidth (–3 dB) | DC to 70 kHz | |
| Input type | Single-ended, unipolar | |
| Input voltage range | 0 to +2.5 V | |
| Linearity (at 25 °C) | 1 LSB | |
| Resolution | 10 bits | 12 bits |
| Accuracy | 1% | 0.5% |
| Overvoltage protection | ±30 V to ground | |
| Input coupling | DC | |
| Input impedance | 1 MΩ | |
| Outputs | ||
|---|---|---|
| Digital output (D0…D3) | 2 | 4#2 |
| Digital outputs (PWM) period duty cycle |
None | 1 100 µs to 1800 µs Adjustable from 0% to 100% in 1% steps |
| Digital outputs (all) logic low voltage logic high voltage current limit |
100 mV (typical) 3.3 V 1 kΩ resistors in series with outputs |
|
| Power output for sensors | 2.5 V @ 10 mA, current-limited | |
| PC requirements | ||
|---|---|---|
| Minimum | Processor: 1 GHz. Memory: 512 MB. Free disk space: 32-bit: 600 MB, 64–bit: 1.5 GB. Operating system: 32- or 64-bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT). Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, macOS. Ports: USB 1.1 port. |
|
| Recommended | Processor: 1 GHz. Memory: 512 MB. Free disk space: 32-bit: 850 MB, 64–bit: 2 GB. Operating system: 32- or 64-bit edition of Microsoft Windows 7 or Windows 8 (not Windows RT). Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, macOS. Ports: USB 1.1 or higher. |
|
| Environmental | ||
|---|---|---|
| For stated accuracy | 20 °C to 50 °C | |
| General operation | 0 °C to 70 °C | |
| Relative humidity | 5% to 80% RH | |
| Physical properties | ||
|---|---|---|
| Dimensions | 45 x 100 x 140 mm (1.77 x 3.94 x 5.51 in) | |
| Weight | <200 g (7.05 oz) | |
| Software | ||
|---|---|---|
| PicoLog for Windows | PicoLog data acquisition software can collect up to 1 million samples. Features include: Multiple views — view data as a graph, spreadsheet or text Parameter scaling — convert raw data into standard engineering units Math functions — use mathematical equations to calculate additional parameters Alarm limits — program an alert if a parameter goes out of a specified range IP networking — transfer measurements via a LAN or over the Internet Operating systems supported: Microsoft Windows 7 to 10 |
|
| PicoLog languages | Full support for: English, Français, Deutsch Menus and dialogs only for: Italiano, Español, Svenska |
|
| PicoScope 6 for Windows | PicoScope 6 is your complete test and measurement lab in one application. Features include: Capture modes: oscilloscope, spectrum and persistence. Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions. Mask limiting testing: pass/fail, failure count, total count. Serial Decoding: decode data from serial buses such as DCC, LIN., PS/2 and UART/RS-232. Automated measurements Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate. Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD). Export data formats: comma separated values (CSV), tab delimited (TXT), Windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT). Operating systems supported: Microsoft Windows 7, 8 and 10*. |
|
| PicoScope languages | Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish | |
| Software Development Kit | Includes example code. | |
| Optional free software | PicoScope 6 Beta (feature list) for Linux and macOS. Drivers for Linux and macOS. | |
* PicoScope R6.11 and earlier and the SDKs are compatible with Microsoft Windows XP (SP3) and Vista SP2 as well as the versions mentioned above.
| Documentation languages | ||
|---|---|---|
| Documentation User’s guide Programmer’s guide Terminal board user’s guide |
English, Français, Deutsch, Español English English |
|
| General | ||
|---|---|---|
| Additional hardware (supplied) | USB 2.0 cable, user manuals, software CD-ROM | |
| PC interface | USB 2.0 | |
| I/O connector | 25-way D female | |
| Power requirements | Powered from USB port | |
| Ground fault current protection | 0.9 A thermal self-resetting fuse | |
| Compliance | European EMC and LVD standards FCC Rules Part 15 Class A RoHS compliant |
|
| Total satisfaction guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. | |
| Warranty | 5 years | |
#1Block mode is supported by PicoScope and the PicoLog 1000 Series SDK, but not by PicoLog.
#2Except in USB ADC-11 compatibility mode.
Product name |
Description |
|
PicoLog 1012 Data Logger |
Data logger with 12 input channels and 10 bit resolution. |
|
PicoLog 1012 with terminal board |
Data logger with 12 input channels and 10 bit resolution including terminal board. |
|
PicoLog 1216 Data Logger |
Data logger with 16 channels and 12 bit resolution. |
|
PicoLog 1216 with terminal board |
Data logger with 16 channels and 12 bit resolution including terminal board. |
Accessories
 |
USB 2.0 cable, 1.8 m MI106 |
 |
Small terminal board for PicoLog 1000 PP545 |
 |
USB 2.0 cable, 0.5 m |
 |
Calibration certificate for voltage input data logger |