Fluke 77 IV Digital Multimeter

sku Product SKU:  FLK-77IV

Versatile meters for field service or bench repair.

The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

It measures:

• Wide 1000 V measurement range
• Average responding AC measurements
• 0.3% accuracy
• 10 Amps continuous (20 A for 30 seconds)
• Frequency and capacitance
• Resistance and continuity

ZAR 13290,0000

Fluke 179 True RMS DMM

sku Product SKU:  FLK-179

The Fluke 179 True-RMS DMM is the industry-standard troubleshooting tool for electrical and electronic systems.

With its precision, reliability, and ease of use, the Fluke 179 is the preferred solution for professional technicians around the world. It includes the features you need to troubleshoot and repair electrical and electronic systems, plus a backlit digital display, analog bar graph, and built-in temperature measurements.

Works When You Need It, Where You Need It

You can trust the rugged reliable Fluke 179 to get the job done in all of the messy, loud, high energy, and high altitude places you work. Whether you need a multimeter for industrial troubleshooting or electrical and electronic system installation or maintenance, the Fluke 179 with its true-RMS capabilities can do the job. It is independently tested for safe use in CAT III 1000 V, CAT IV 600 V environments and backed by a lifetime warranty

Just One of Fluke's Trusted Tools

Fluke builds the most trusted tools in the world, which means more than just the Fluke 179. If you work with HVAC equipment, work in the electrical installer's and repairman's world or need a small meter for small spaces, check out the full family of Fluke digital multimeters.

Other useful features:

• Safety rated CAT III 1000 V, CAT IV 600 V
• Comes with a lifetime warranty
• Allows closed-case calibration through front panel
• Includes ergonomic case with integrated protective holster

ZAR 11690,0000

Fluke 233 Remote Display Multimeter

sku Product SKU:  FLK-233

Fluke 233 Remote Display Digital Multimeter gives you ultimate flexibility in tough measurement situations

The Fluke 233 Digital Multimeter with its removable display gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. You can be in two places at once and reduce the risk of arc flash by separating yourself from hazardous measurement situations. Just connect the meter to the test point and then place the display in a location up to 10 meters (33 ft.) away where you can see it. No more having to stretch into tight spots or hard to reach locations to take measurements. No more having to hold both the meter and the test leads to make a measurement. The Fluke 233 is ideal for any application where the measurement point is separated from controls or where you can't stay close to the meter during measurements due to hazards, moving machinery or in clean rooms. Plus, it features True RMS AC voltage and current for accurate measurements on non-linear signals.

ZAR 13290,0000

Fluke PRV240FS Proving Unit

sku Product SKU:  FLK-PRV240FS

Product overview: Fluke PRV240FS Proving Unit

Designed for safety and compliance
Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before tests are performed*.  Additionally, the PRV240FS also provides ac and dc voltages for other HiZ instruments in your tool box.
 
A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools.
 
*PPE is still needed for absence of voltage testing when appropriate.
 
“Test Before Touch”
Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

ZAR 6090,0000

Fluke 177

sku Product SKU:  FLK-177

Product overview: Fluke 177 True-RMS Digital Multimeter

Fluke 177 True-RMS Digital Multimeter delivers the right features for electrical maintenance experts

With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke 177 includes all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

With the Fluke 177 Digital Multimeter you get True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging, and frequency, capacitance, resistance, continuity, and diode measurements. In addition, the Fluke 177 provides 0.09% basic accuracy, a digital display with analog bar graph and backlight. Plus a limited lifetime warranty.

Other useful features:

• Features digital display with backlight for working in dim lighting
• Allows closed case calibration through front panel
• Features an ergonomic case with integrated protective holster
• Comes with a limited lifetime warranty

ZAR 10390,0000

Fluke Ti480 PRO Infrared Camera 9Hz

sku Product SKU:  FLK-Ti480PRO

Product overview: Fluke Ti480 PRO Infrared Camera

Increased sensitivity to visualize differences

• Capture narrower temperature differences with increased thermal sensitivity

 
Old screen clarity versus the new sharper screen image

Easier to visualize and diagnose issues

• Sharper onscreen images with better visual color differentiation
• Display deviations from standard temperatures and communicate issues with your team using multiple Delta-T markers - choose one as a reference point and the others to display a value as a difference
• Multiple rectangle markers in-camera - identify min/max temperatures for an area of ​​the equipment or an equipment array
• Distinguish heat differences more easily with a new palette and a wider array of yellows and greens in the display

New intuitive user interface

Old user interface

More intuitive visual interface

• Improved, user-tested, touch screen interface leverages current styles and is more intuitive than ever

More flexibility to visualize targets -  tiny to large

• Now compatible with all Fluke infrared smart lenses
• Macro, telephoto and wide angle – from tiny to large, capture your target
• Fluke smart lenses are interchangeable between compatible cameras without calibration

With the Ti480 PRO MultiSharp™ focus captures images that are focused throughout the field of view, even if you start from a completely blurry target. The camera takes multiple images and combines them to give a clear, accurate focus on targets near and far. See more detail with SuperResolution, offering 4x the pixel data. Using the software and SuperResolution you can view images with up to 1280 x 960 resolution.

Fluke 820-2 LED Stroboscope

sku Product SKU:  FLK-820-2

Investigate and observe potential mechanism failure with confidence

Identifying the running speed of rotating equipment can be difficult, but the Fluke 820-2 LED Stroboscope simplifies the process allowing you to perform stop motion diagnostics without actually stopping, or making contact, with the machine you are working on. Whether you are trying to diagnose parasitic oscillations, slippage, or unwanted distortions, the 820-2 LED Stroboscope is the ideal frontline troubleshooting, process or product research and development tool.

Other useful features:

• Includes digital pulse width modulation for exceptionally sharp images at high speeds
• Provides rugged, durable design that uses solid-state LEDs with no filaments, gases, hollow cavities, or glass; (1 meter drop tested)
• Features quartz-accuracy control system for high accuracy–0.02% (+/- 1 digit)
• Provides a multi-line LCD display
• Includes advance or retard flash timing for viewing gear teeth, cutting surfaces, repeats, or drifting equipment
• Features simple push button operation with 2x and ÷2 buttons for easy adjustment

ZAR 33690,0000

Fluke 810 Vibration Tester

sku Product SKU:  FLK-810

Fluke 810 Vibration Tester: When you need an answer now...

Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.

The Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.

You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by coupling a powerful diagnostic engine with a simple step-by-step process to report on specific machine faults and their severity the first time measurements are taken, without prior measurement history. Overall vibration measurements and spectral diagrams give technicians the ability to quickly asses overall machine health, while enhanced reporting and actionable recommendations give you the confidence you need to address critical problems first.

Available at select distributors.

ZAR 335000,0000

Fluke 568 Ex Intrinsically Safe Infrared Thermometer

sku Product SKU:  FLK-568-Ex

Use the Fluke 568 Ex for intrinsically safe temperature measurements anywhere in the world

The Fluke 568 Ex Intrinsically Safe Infrared Thermometer is certified by major rating bodies for use in Class I Div. 1 and Div. 2 or Zone 1 and 2 hazardous environments anywhere in the world. Whether you work in petroleum, chemical, oil and gas, or pharmaceutical environments, the 568 Ex allows you to carry the most trusted name in test tools into most Ex-rated areas around the globe. The simple, three-button on-screen menu interface is quick to use and makes even complex measurements easy. It takes just a few pushes of a button to adjust emissivity, record data, or turn on and off alarms. The 50:1 distance-to-spot ratio allows you to measure smaller objects from further away. And it also is compatible with K-type probes for contact measurements. Either way, you can count on the rugged, ergonomic design to stand up to tough conditions.

ZAR 63990,0000

Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics

sku Product SKU:  FLK-709H

The Fluke 709H mA loop calibrator is designed to save time and produce high-quality results. It includes HART communication and supports a select set of the HART universal and common practice commands. This makes the 709H unique as both an affordable, compact loop calibrator and powerful HART communication tool that offers:

• Fast transfer of calibration data: The optional 709H/Track software/cable can document the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format

• Data logging or recording data on a particular transmitter for troubleshooting: The data log tool offers a selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions.

In the communicator mode the user can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. The Fluke 709H will allow virtually any technician to service and support HART devices.

And it's easy to use. The Fluke 709H is built around a user-friendly interface with a Quick-Set rotary encoder knob. This reduces the time it takes to measure or source voltage or current, and power up a loop. The protective holster easily fits into a technician's hand and the large backlit display is easy to read, even in dark, cramped worked areas.

ZAR 53990,0000

Fluke C1600 Gear Box for Meters and Accessories

sku Product SKU:  FLK-C1600

The C1600 is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters.

ZAR 3163,0000

Fluke 173X Hanger Strap Kit

sku Product SKU:  FLK-1730-HANGER

Two piece hanging kit for the Fluke 1730 Energy Logger.

ZAR 2683,0000

Fluke i17XX-flex6000/3pk iFlex Current Clamp

sku Product SKU:  FLK- i17XX-flex6000/3pk

The Fluke 17XX 36 inch iFlex flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 6000 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the energy logger, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the energy logger making it easier to view the display. Fluke 17XX iFlex cables are available in 12, 24, and 36 inches.

ZAR 20813,0000

Fluke 1736 and 1738

sku Product SKU:  FLK-173x-EUS

The Fluke 1736 and 1738 Three-Phase Power Loggers built with Fluke Connect® mobile app and desktop software compatibility give you the data you need to make critical power quality and energy decisions in real-time. The ideal test tools for conducting energy studies and basic power quality logging, the 1736 and 1738 automatically capture and log over 500 power quality parameters so you have more visibility into the data you need to optimize system reliability and savings. With the Fluke 1738 Advanced Power Logger you can perform advanced analysis with an enhanced Power Quality Health Summary (EN50160) function that provides you with fast insight into overall electrical system health. The Power Quality Health Summary is an evaluation of the logged data based on detailed power quality measurements and includes viewable event waveform captures so you have even more visibility into the data you need to optimize system reliability and savings.

An optimized user interface, flexible current probes, and an intelligent measurement verification function that allows you to reduce measurement errors by digitally verifying and correcting common connection errors makes setup easier than ever and reduces measurement uncertainty. Access and share data remotely with your team via the Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins. You can also quickly and easily chart and graph measurements to help identify issues and create detailed reports with the included Fluke Energy Analyze Plus software package. Optionally, you can create IEEE519 Reports giving you more insight into harmonic levels, voltage and current distortion, and load current (license required).

Log the most common parameters

Designed to measure the most critical three phase power parameters, the 1736 and 1738 can simultaneously log rms voltage, rms current, voltage and current events, voltage and current THD, voltage and current harmonics up to the 50th harmonic, active power, reactive power, power factor, active energy, reactive energy, and more. With enough memory for more than a year of data logging, the 1736 and 1738 can uncover intermittent or hard-to-find issues that might otherwise have been missed.

Analysis and Reporting

Capturing logged data is just one part of the task. Once you have the data, you need to create useful information and reports that can be easily shared and understood by your organization or customers. Fluke Energy Analyze Plus software makes that task as simple as possible. With powerful analysis tools and the ability to create customized reports in minutes you’ll be able to communicate your findings and quickly solve problems so you can optimize system reliability and savings.

 

ZAR 155990,0000

Fluke ScopeMeter Portable Oscilloscopes 120B Series

sku Product SKU:  FLK-120BS

Simplified testing, more insight, and faster electro-mechanical troubleshooting

The compact ScopeMeter® 120B Series is the rugged oscilloscope solution for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It's a truly integrated test tool, with an oscilloscope, multimeter, and high-speed recorder in one easy-to-use instrument. The ScopeMeter 120B Series also integrates with Fluke Connect® mobile app and FlukeView® for ScopeMeter software to enable further collaboration, data analysis, and archiving of critical test information.

*Not all models are available in all countries. Check with your local Fluke representative.

Other useful features:

• Features two 5,000-count True-RMS digital multimeters
• Offers recorder Event Detect to capture elusive intermittent signals on repetitive waveforms up to 4 kHz
• Comes with shielded test leads for oscilloscope, resistance and continuity measurements
• Features resistance, continuity, diode, and capacitance meter measurements
• Performs power measurements (W, VA, VAR, PF, DPF, Hz)
• Measures voltage, current and power harmonics
• Check Industrial networks with BusHealth physical layer tests against defined reference levels (125B only)
• Allows you to save and recall data and instrument setups
• Includes FlukeView® ScopeMeter® software for Windows®
• Features a rugged design to withstand 3g vibration, 30g shock, and rated IP51 according to EN/IEC60529
• Runs on a Li-Ion rechargeable battery providing seven-hours operation (with four-hour charge time)
• Features highest safety rating in the industry: safety rated for CAT IV 600 V

ZAR 59890,0000

Fluke 789 Process Meter

sku Product SKU:  FLK-789-E

Fluke C17XX Soft Case

sku Product SKU:  FLK-C17XX

Soft shell carrying case for the Fluke 17XX Energy or Power Logger and accessories.

ZAR 5862,0000

Fluke 805ES

sku Product SKU:  FLK-805ES

External Vibration Sensor for the 805 Vibration Meter

The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.

ZAR 36690,0000

Fluke 787B Process Meter

sku Product SKU:  FLK-787B

Fluke 62 MAX Infrared Thermometers

sku Product SKU:  FLK- 62-MAX

Fluke 64 MAX IR Thermometer

sku Product SKU:  FLK-64-MAX

Fluke 572-2 High Temperature Infrared thermometer

sku Product SKU:  FLK-572-2

Fluke-572-2 High Temperature Infrared Thermometer measures temperatures up to 900°C

The Fluke 572-2 High-Temperature Infrared Thermometer is the ideal tool for high-temperature industrial environments all around the world. Whether you work in power utility, metal refining and smelting, glass, cement or petrochemical environments, the 572-2 offers the rugged performance accuracy you need to get the job done, backed by the most trusted name in test tools. The simple, three-button on-screen menu interface saves time and makes even complex measurements easy. With just a few pushes of a button you can adjust emissivity, start data logging, or turn on and off alarms. The 60:1 distance-to-spot ratio with dual laser sighting helps pinpoint the target fast, making it easier to measure small objects from a long distance.

Other useful features:

• Audible and visible alarms for rapid detection of high and low temperatures outside the limits
• Stores up to 99 data sets for review and analysis
• Powered by two, standard AA batteries -30-
• Presents infrared and thermocouple temperatures on a bright backlit display
• Is compatible with standard mini-connector K-type thermocouples, including ones you already own and have installed
• Features last reading Hold (20 seconds)

ZAR 26490,0000

Fluke 805FC

sku Product SKU:  FLK-805FC

The reliable, repeatable, accurate way to check bearings and overall vibration

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

Other useful features:

• Allows you to export data via USB
• Compatible with Fluke Connect® Mobile App that can transmit measurements to your smartphone to be shared in real time
• Enables you to get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live™ video call*
• Allows you to view trending in Microsoft® Excel using pre-built templates
• Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
• Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
• Compares vibration levels with ISO-10816 severity scales and stores results to the Fluke Connect Cloud
• Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
• Measures temperature with Spot IR Sensor to increase diagnostic capabilities
• Holds and saves up to 3,500 measurements in on-board memory
• Provides external accelerometer support for hard to reach locations
• Features built-in flashlight for viewing measurement locations in dark areas
• Provides large high-resolution display for easy navigation and viewing

ZAR 65990,0000

Fluke T6-600

sku Product SKU:  FLK-T6-600

Measure voltage... without test leads

Working in cramped electrical boxes and trying to find a safe metallic contact point is often challenging. The Fluke T6-600 Electrical Tester with FieldSense™ technology, lets you quickly and safely take measurements by sliding the open fork over a conductor, without the need for test leads. The T6-600 works with wires up to AWG 4/0 (120 mm2) with a 17.8 mm jaw opening

How FieldSense™ technology works

FieldSense™ technology is a breakthrough in how voltage is measured. Other open fork testers detect a magnetic field to show AC current. FieldSense™ technology detects an electrical field, which interacts with a reference signal created by the T6 tester, which shows the measurement value on the tester's display.

Tips on using FieldSense technology

• Do not hold or touch wire you are testing during a measurement.
• Use the black probe to make the ground connection if you are wearing gloves, insulated footwear or standing on an insulated ladder

Measurement versatility

The electrical tester offers a variety of measurement options giving you an all-in-one troubleshooting tool. Measure true rms voltage and current from 0 to 200 A AC or 1 to 600 V AC or DC. You can also gather resistance measurement from 1 Ω to 2000 Ω. With the easy-to-read backlit display, you can keep see your work in dark environments and keep your most recent measurement on the screen with the HOLD button for easy viewing. The T6-600 also accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation.

ZAR 7490,0000