• Introducing the PicoScope 4000A Series high resolution oscilloscopes

    Crystal-clear waveform analysis
    This video gives you a brief overview of our PicoScope 4000A Series oscilloscopes with 2-, 4- or 8-channels of high-resolution.

    https://comtest.co.za/Products-Paid/Product-Details-Paid/picoscope-4000a-series
    6 Views
  • Introducing the Fluke IRR1 SOL Irradiance Meter

    hether you’re surveying, installing, executing maintenance or checking the performance of solar panels or a photovoltaic system, the Fluke irradiance meter takes 4 critical measurements needed.

    With the Fluke irradiance meter, you can make instantaneous measurements to determine the watt per square meter solar irradiation. Measure the ambient temperature at the panel easier and faster than ever.

    The Fluke IRR1-SOL is the only irradiance meter that can take the temperature without needing an external probe. This is enabled by innovative Fluke technology which embeds an integrated conductive temperature sensor in the meter. Temperature can also be measured with increased accuracy with the external temperature probe.

    + A built-in compass enables you to measure and document roof or site orientation.

    + An inclination sensor lets you know the solar panel tilt when surveying, installing or adjusting the installation.

    + The Fluke irradiance meter is robust, rugged, compact, and ergonomically designed so it fits comfortably in your hand.

    + The high contrast LCD and large, readable numbers make the screen easy to see even in bright sunlight.

    + It comes with a convenient carry case with a shoulder strap.

    Get all the critical photovoltaic measurements needed to install, verify, and report on the performance of a photovoltaic system in one easy-to-use instrument.

    ttps://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-flk-irr1-sol
    8 Views
  • Why do I need an insulation tester | Comtest Fluke Pro Tips

    Shaun from Fluke educates us why an insulation tester is a crucial tool to have. He elaborates on the benefits yield by the insulation meter.

    Check out our insulation testers and see what they do: https://comtest.co.za/Online-Store/Ca...
    -----------------------------------------------------------
    Why do you need an insulation tester?
    The insulation tester is designed to check the integrity of conductors wires or check the insulation value of motor/compressor windings. We check if there is a breakdown in there that might cause malfunctioning. Insulation tester is helpful for a preventive maintenance plan (PMP) it allows you to do a streamlined test and baseline test.
    53 Views
  • The Importance of Battery Testers Fluke Pro Tips

    Fluke Pro, Jason Axelson explains why early identification of battery failure helps keep your assets as well as your company up and running.

    Use a battery tester to measure voltage, internal resistance, and strap resistance to find indications of early-stage battery failure or installation problems.

    Key measurements – Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency, and temperature.

    Sequence measurement mode – Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance, and temperature (with BTL21 intelligent test probe), eliminating the need to press a button each time measurement needs to be saved.

    Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on-the-go analysis.

    Learn more about the Fluke 500 Series Battery Analyzer: https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-500-series-battery-analyzer
    98 Views
  • Fluke TiS60+ Infrared Camera Product Overview

    Get the job done right the first time with Fluke TiS60+ Infrared Camera
    Boost your team’s performance with 320 x 240 resolution and outstanding 45mK thermal sensitivity. Its easy-to-use fixed focus means you can simply just point and shoot, and the TiS60+ will do the rest.
    140 Views
  • 0:10 / 4:27 Fluke 5730A Multifunction Calibrator

    The Fluke Calibration 5730A High-performance Multifunction Calibrator calibrates a wide range of digital multimeters, up to long-scale 8.5 digit DMMs, as well as RF voltmeters when equipped with the wideband option
    219 Views
  • Triggering on Digital Signals with the TBS1000B-EDU I TDS1000B Oscilloscopes I Tektronix

    The Tektronix TDS1000B is the world's first dedicated teaching oscilloscope. This video will show you how flexible triggering alternatives can help you capture and analyze your waveforms.
    167 Views
  • Fluke PQ400 Three Phase Electrical Measurement Window

    Introducing the Fluke PQ400 Electrical Measurement Window— the safer, easier way to make three-phase power quality measurements.

    The Fluke PQ400 Electrical Measurement Window is a permanently installed interface that allows you to make three phase measurement connections on energized panels, without opening the panel door. Once installed, the PQ400 Electrical Measurement Window gives you access to critical power quality and energy data while decreasing testing time and helping you to maintain safety.

    Use the PQ400 Electrical Measurement Window to reduce the risk of arc flash and electrocution when making power quality and energy measurements, increasing the safety of your personnel and reducing the need for supplemental personal protective equipment. With permanently connected voltage and current sensors located inside the electrical panel you can make power quality and energy measurements using the external access points all without opening the panel door. Three phase voltage, current, neutral and ground connects are designed to cover most measurement scenarios, and with full 360-degree rotation you can install the PQ400 window in whichever orientation you choose.
    191 Views
  • Distance to Fault Test using the Bird SiteHawk

    Step by Step instructions on how to perform Distance to Fault Test using the Bird SiteHawk.
    181 Views
  • Fluke Diagnostic Videoscopes for Industrial Inspections

    Industrial inspections require a powerful diagnostic videoscope designed to stand up to the dirtiest, most harsh environments.

    Fluke Diagnostic Videoscopes put high-resolution images in the palm of your hand.
    • High definition probe with dual-view camera
    • Processing speeds that render a smooth, clear, consistent image
    • 7” LCD screen for easy viewing
    • Macro to micro zoom function
    • Adjustable lighting to capture the best image

    Fluke DS701 Diagnostic Videoscope:
    Rugged, industrial 800 x 600 resolution diagnostic videoscope with dual view probe. Inspection camera with 7” LCD screen for accurate diagnostics in difficult to reach spaces. Adjustable LED lighting and digital zoom for quality images. Up is Up® technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe (8.5 millimeter, 1.2 meter probe only). Intuitive user interface with easy to navigate button technology.

    Fluke DS703 FC High-Resolution Diagnostic Videoscope with Fluke Connect®:
    Rugged, high-definition industrial 1280 x 720 resolution diagnostic videoscope with Wi-Fi capability. 7” capacitive touch screen for accurate diagnostics in difficult to reach spaces. 720p video recording inspection camera. Adjustable LED lighting and digital zoom for quality images. Up is Up® technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe (8.5 millimeter, 1.2 meter probe only).

    Save time with the Fluke Connect® system:
    Wirelessly sync images directly from your videoscope to the Fluke Connect® system, and attach to an asset record or work order. Having access to maintenance records simultaneously at the inspection site and from the office or an off-site location enables faster decision making and real-time collaboration between team members. You can also live stream images or videos from your Scope to a smartphone or PC.
    195 Views
  • Spectrum analyser demo on the MDO-2000E

    MDO-2000E series is equipped with a dual channel 25 MHz arbitrary waveform generator.
    We could utilize arbitrary waveform generator to output waveforms and conduct frequency domain analysis by the built-in spectrum analyzer.
    1174 Views