Online Buying Store Product Details

{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

Differential picosecond pulse generators
Please select an item in the list...
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

Personal Greeting

PG911 and PG914

  • Integral 50 Ω SMA(f) Step Recovery Diode outputs
  • < 60 ps transition time
  • Dual 2.5 to 6 V variable amplitude outputs
  • ±1 ns in 1 ps steps timing deskew
  • 200 ns to 4 μs pulse width
  • 1 μs to 1 s internal clock period
  • ​< 3 ps RMS jitter relative to external trigger
  • –20 dB 10 GHz SMA(m-f) attenuator included with Step Recovery Diode outputs

PG912 and PG914

  • External 50 Ω N(m) positive and negative Tunnel Diode pulse heads
  • < 40 ps transition time
  • Dual > 200 mV fixed amplitude outputs
  • ​±200 ps in 1 ps steps timing deskew
  • Inter-series N(f) – SMA(m) adapter included with Tunnel Diode pulse heads

The fast-transition pulse can stimulate a transmission path, device or network with a broad spectrum signal in a single instant. Such a pulse is very useful for many of the high-speed broadband measurements that we need to make; for instance in time-domain reflectometry, semiconductor test, gigabit interconnect and port test and in radar.

Differential high-speed data in particular dominates the measurement challenge in our digital, computing, interconnect and telecommunications systems. Surprisingly, cost-effective fast-transition differential pulse generators have been very hard to find ... until now!

Typical applications include:

  • TDR/TDT network and match analysis
  • Spectral and flatness measurements
  • Timing, jitter and crosstalk determinations

PicoSource PG900 Series specifications

PicoSource PG911 and PG914

Integrated step recovery diode pulse outputs
Pulse outputs Positive-going (fast rise) and negative-going (fast fall) outputs returning to 0 V.
Adjustable amplitude and timing parameters. Fast transition on leading edge.
Output impedance 50 Ω
Output connector SMA(f)
Output amplitude Adjustable 2.5 V to 6 V in 10 mV steps
Output accuracy ±10%
Output amplitude limit 2.5 V to 6 V, adjustable in 100 mV increments
Duty cycle limit 50% maximum (for 2.5 V to 4 V amplitude)
20% maximum (up to 6 V amplitude)
Differential deskew range Adjustable in 1 ps steps over 2 ns range
  Positive or negative-going, smooth mode: Negative-going, fast mode:
Pulse transition time < 60 ps (10% to 90%) (smooth mode) < 50 ps (10% to 90%)
Pulse aberrations < +20%, –10% for first 2 ns
< ±7% to 10 ns
< ±2% to pulse width –50 ns

< (+40%, –10%)

Trailing edge transition time < 8 ns (10% to 90%)

PicoSource PG912 and PG914

Drive outputs with tunnel diode pulse heads
PS9040 Positive tunnel diode pulse head Positive-going (fast rise) output on < 70 mV pedestal.
Fixed amplitude and adjustable timing parameters.
Fast transition on leading edge.
PS9041 Negative tunnel diode pulse head Negative going (fast fall) output on < –70 mV pedestal.
Fixed amplitude and adjustable variable timing parameters.
Fast transition on leading edge.
Output impedance 50 Ω, ±2 Ω
Output connector N(m)
Output amplitude Fixed 200 mV
Output accuracy ±25%
Differential deskew range Adjustable in 1 ps steps over 200 ps minimum, 300 ps typical
Pulse transition time < 40 ps (10 % to 90%)
Pulse aberrations < ±20%, for first 2 ns
< ±7% to 15 ns
< ±2% to (pulse width – 50 ns)
Trailing edge transition time < 8 ns (10% to 90%)
Dimensions (each pulse head) 80 mm x 28 mm x 25 mm
Weight (each pulse head) 125 g

All models and outputs

Pulse timing
Pulse trigger source External input, manual single shot event or internal clock
Jitter relative to leading edge 3.0 ps RMS typical. 3.5 ps RMS maximum.
Post-trigger delay to pulse leading edge Fixed 42 ns ±2 ns
Allows leading-edge capture on sampling oscilloscopes
Pulse width and accuracy 200 ns to 4 µs ± 10% ± 50 ns, user adjustable in steps of 25 ns
Pulse width jitter < 150 ppm of width RMS
External trigger hold-off Adjustable 1 μs to 1.3 ms in steps of 200 ns, to maximum of 345 ms in steps of < 15 ppm
Internal clock specification
Period and accuracy Adjustable 1 µs to 1 s, ±100 ppm ±10 ns in steps of 200 ns
External trigger input specification
Impedance 50 Ω ±1%
Connector SMA(f)
Maximum input level +16 dBm, or ±2 V DC or AC pk
Bandwidth 1 GHz, DC coupled
Trigger polarity Selectable rising or falling edge
Trigger level Selectable –1 V to +1 V in steps of 1 mV
Sensitivity < 50 mV pk-pk DC to 100 MHz, rising linearly to 100 mV pk-pk at 1 GHz
Minimum pulse width 500 ps at 100 mV pk-pk
External trigger output specification
Trigger output pulse Fixed amplitude and timing parameters, positive edge polarity, trigger is leading edge
Impedance 50 Ω, ±0.5 Ω
Connector SMA(f)
Amplitude and offset > 700 mV fixed, on logic low of 0 V ± < 100 mV
Pulse width 500 ns, ±100 ns
Trigger to trigger output delay 4 ns, ±1 ns
Trigger to trigger output jitter 2.5 ps rms typical. 3 ps rms maximum.
Transition time < 400 ps (10% to 90%)
General specifications
AC to DC adaptor 5 V ±5% at 1.6 A, 8 W, universal plug (adaptor included)
PC connection USB 2.0 (USB 1.1 and USB 3.0 compatible), 1.8 m USB 2.0 lead included
PC requirements Windows XP SP3 to Windows 8
Operating temperature range +5 °C to +35 °C
Storage temperature range –20 °C to +50 °C
Temperature range for stated specifications +15 °C to +25 °C or TCAL (temperature of calibration) ±5 °C
Operating humidity range < 85% RH (non-condensing) at +25 °C
Storage humidity range < 95% RH (non-condensing)
Dimensions (instrument) 190 mm W x 180 mm D x 40 mm H
Weight (instrument) 560 g
Warranty 5 years

Specifications describe guaranteed performance over the stated temperature range and apply after the instrument’s temperature has been stabilized in 1 hour of continuous operation. All specifications are subject to change without notice.

Factory calibration cycle. For optimum performance, the instrument should have a complete verification of specifications once every 12 months.

PicoSource PG911

50 Ω SMA(f) < 60 ps differential pulse outputs, 2.5 V to 6 V variable amplitude

PicoSource PG912

50 Ω N(m) < 40 ps positive and negative tunnel diode pulse heads, > 200 mV fixed amplitude

PicoSource PG914

Dual-mode generator with both of the above outputs

 

For more information please click here

PicoSource PG900 Series manuals

Resource Language Version Size Updated
Data Sheets:
PicoSource PG900 Pulse Generators Data Sheet English 8 2 MB August 13 2019
User’s Guides:
PicoSource PG900 Series Pulse Generators User’s Guide English 1 5 MB February 03 2016
Programmer’s Guides:
PicoSource PG900 Series Pulse Generators Programmer’s Guide English 1 822 KB April 06 2016
Quick Start Guides:
PicoSource PG900 Series Quick Start Guide English 1 503 KB February 09 2016
Declarations:
PicoSource PG900 Series EU Declaration of Conformity English 1 1 MB December 04 2019