Fluke HL-200 EX Intrinsically Safe Headlamp

sku Product SKU:  FLK-HL-200

Work with confidence.

You’ve always trusted Fluke for the best in intrinsically safe measurement tools. Now, Fluke expands this line to include safe, convenient and rugged flashlights to help you see the work you’re doing, wherever you may be.

The HL-200 EX is a hands-free headlamp. This headlamp securely grips your hardhat, leaving you hands-free for whatever your job demands. The light features an adjustable angle, as well as high and low light modes.

ZAR -1

Amprobe MT204-S

sku Product SKU:  AMP-MT204-S

• Earth bond resistance measurement with 10 A AC or 0.2 A AC Loop / mains impedance measurement up to 440V
• Display of prospective short circuit current
• Insulation resistance measurement with 250 V to 500 V test voltage (adjustable)
• Residual voltage measurement Display of the discharge voltage / discharge time
• Integrated high-voltage test (can be switched off by means of a key switch)
• Easy operation using the rotary switch and the START/STOP button

 

ZAR -1

TA223 TETRIS 2500

sku Product SKU:  PIC-TA223

ZAR -1

Fluke TLK-225 SureGrip

sku Product SKU:  FLK-TLK225

Test leads are an integral part of the complete measurement system. Worn out test leads can cause inaccurate readings and pose serious shock or electrocution hazard. The Fluke TLK-225 SureGrip™ Master Accessory Set with 13 items is the perfect replacement kit that provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six-pocket, roll-up pouch.

ZAR -1

Fluke 233 Remote Display Multimeter

sku Product SKU:  FLK-233

Fluke 233 Remote Display Digital Multimeter gives you ultimate flexibility in tough measurement situations

The Fluke 233 Digital Multimeter with its removable display gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. You can be in two places at once and reduce the risk of arc flash by separating yourself from hazardous measurement situations. Just connect the meter to the test point and then place the display in a location up to 10 meters (33 ft.) away where you can see it. No more having to stretch into tight spots or hard to reach locations to take measurements. No more having to hold both the meter and the test leads to make a measurement. The Fluke 233 is ideal for any application where the measurement point is separated from controls or where you can't stay close to the meter during measurements due to hazards, moving machinery or in clean rooms. Plus, it features True RMS AC voltage and current for accurate measurements on non-linear signals.

ZAR -1

Fluke PRV240 Proving Unit

sku Product SKU:  FLK-PRV240

Product overview: Fluke PRV240 Proving Unit

Unique, compact, convenient

The Fluke PRV240 Proving Unit is a portable, pocket-sized, battery-powered voltage source. It is unique in that it sources stable ac and dc voltages for both LoZ and HiZ instruments.

Designed for safety and compliance

The Fluke PRV240 provides a safe method to verify that your electrical test tool is operating properly before you conduct any live tests. The concept of “Test Before Touch” (TBT) involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240 reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before test before TBT are performed. PPE is still needed for absence of voltage testing when appropriate.

Product Highlights

• A single LED indicates functionality, making this unit a simple-to-use solution for complying with TBT verification of your test tool
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Includes TPak™ Magnetic Hanging Strap
• Long battery life—5,000 tests per set of four AA batteries

ZAR -1

Fluke PRV240FS Proving Unit

sku Product SKU:  FLK-PRV240FS

Product overview: Fluke PRV240FS Proving Unit

Designed for safety and compliance
Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before tests are performed*.  Additionally, the PRV240FS also provides ac and dc voltages for other HiZ instruments in your tool box.
 
A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools.
 
*PPE is still needed for absence of voltage testing when appropriate.
 
“Test Before Touch”
Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

ZAR -1

FLUKE 279FC IFLEX

sku Product SKU:  FLK-279FC-IFLEX

Fluke 279 FC Wireless True-RMS Thermal Digital Multimeter

The 279 FC multimeter is a full-featured multimeter with built-in thermal imager that reveals hot spots that may indicate electrical issues quickly and safely.

Thermal imaging multimeters are a first-line troubleshooting tool for electrical equipment that can check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices and switches. Scanning with the 279 FC's thermal imager reveals many electrical issues rapidly and from a safe distance. By combining two tools into one, this thermal multimeter lightens the load and increases productivity.

Expanded functionality

This digital multimeter is compatible with iFlex® (a flexible current clamp) to expand your measurement capabilities and get into tight, hard to reach spaces for current measurement (up to 2500 A AC). This electrical multimeter has a large full-colour LCD screen makes for easier and clearer viewing of images and readings.

The 10 hour+ rechargeable battery keeps you going all day long under normal conditions.

Communicate your results

With built-in Fluke Connect®, transmit results wirelessly to a smartphone and save time on reporting to validate work is complete. Troubleshoot better by instantly trending and monitoring measurements live on your smartphone screen. Create and email reports right from the field.

Other useful features

• Full-featured electrical multimeter with the built-in thermal imager
• 15 measurement functions including voltage ac and dc, resistance, continuity, capacitance, diode test, Min/Max/Avg, current ac with included iFlex current probe, frequency
• Low-pass filter for troubleshooting adjustable speed drives Thermal imaging reveals hots spots that may indicate electrical issues quickly and safely
• Two-in-one tool is designed to increase productivity – no need to go back to the truck or office to retrieve a shared camera – so you can do more in less time!
• iFlex expands your measurement capabilities – get into tight, hard to reach spaces for current measurement (up to 2500 A ac)
• Save measurements and images while communicating wirelessly with a smart phone up to 20 feet / 6.1 m away (no obstructions)
• 102x77 image resolution offers immediate visual cues of hot, potentially troublesome areas
• 3.5 in /8.89 cm colour LCD screen
• A rechargeable lithium-ion battery allows for a full workday (10+ hours) under normal conditions; a second battery option means you will always have a battery ready to install.
• Three-year standard warranty
• Auto power off to save battery power
• CAT III 1000 V, CAT IV 600 V measurement category
• Designed for durability, built to withstand a 1 m (3 ft) drop, double insulated with raised rubber holster for increased protection

Includes

• 279 FC TRMS Thermal Multimeter
• 45.72 cm (18 in) iFlex Flexible Current Probe
• (1 pair) TL175 Test Leads
• Rechargeable Lithium-Ion Battery and Charger
• Soft Carrying Case
• Hanging strap

ZAR -1

Fluke 287

sku Product SKU:  FLK-287

Now compatible with Fluke Connect® Mobile App

The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before:

• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• On board help screens for measurement functions.
• Saved measurements allow you to name and recall measurements made in the field.
• Multi-lingual interface.
• Multiple logging sessions possible without download.
• 0.025% basic DC accuracy.
• 100 kHz AC bandwidth.
• Real time clock for automatic time stamping of saved readings.
• True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Temperature function.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements. • Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
• Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.

ZAR -1

Fluke 289 True-RMS Data Logging Multimeter

sku Product SKU:  FLK-289

The Fluke 289 is the next generation high performance industrial logging multimeter. This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. Let the 289 be your watchdog for systems or processes while you are off doing other jobs. It provides the ability to log data and graphically review up 10,000 recorded events and logged readings with on-board TrendCapture. Zoom on trend provides a 14x zoom to view and analyze data—without needing a PC.

Because the 289 is Fluke Connect-compatible you can set it up with the ir3000 FC wireless connector (sold separately) to communicate with your iOS and Android smart devices through the Fluke Connect mobile app and monitor readings from a remote location. Or you can share readings with your team in an instant anytime, from anywhere with ShareLive™ video call. It can help you solve problems faster and minimize downtime.

ZAR -1

Fluke Ti300+ Thermal Camera

sku Product SKU:  FLK-Ti300+

Leading an industrial maintenance team requires a unique combination of communication skills, industry knowledge and technical expertise. Implementing standard work and a preventive maintenance program is more than just good for business – it also aligns your team with a common goal of safely and efficiently keeping the plant up and running. Choosing the right tools can make a significant difference in the success of these types of programs.

The Fluke Ti300+ helps teams find issues before they are fully formed problems. It has the resolution and accuracy needed to clearly reveal temperature differentials or demonstrate progressive heat changes over time. With LaserSharp™ AutoFocus the Ti300+ ensures focused images – every single time. With the touch of a button, use the built-in laser distance meter to calculate and display the distance to your designated target on the camera screen and snap the image in focus. Most importantly, temperature readings from in focus images will be highly accurate. Enable your team to get clear images while maintaining a safer distance from operating equipment.

For thermal images to illustrate an issue, you need to know your equipment and understand the subtle difference between normal and abnormal operating temperatures. You also need confidence in your ability to capture accurate thermal images and having a Fluke Ti300+ thermal camera with LaserSharp AutoFocus makes taking everything much easier. Finally, you need a thermal camera that is rugged enough to capture quality infrared images even if it gets dropped (up to two meters).

ZAR -1

FlukeLITE 302 PLUS

sku Product SKU:  FLKLITE-302PLUS

The Fluke 302+ comes with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 400 A, a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

ZAR -1

FlukeLITE 303

sku Product SKU:  FLKLITE-303

Compact. Easy to use. Fluke tested.
The Fluke 303 comes with all the rugged, reliable, and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 600 A, a large 30 mm jaw opening, and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

ZAR -1

FlukeLITE 305

sku Product SKU:  FLKLITE-305

Compact. Easy to use. Fluke tested.
The Fluke 305 comes with all the rugged, reliable, and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 999 A, a large 30 mm jaw opening, and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

ZAR -1

FlukeLITE 317/319

sku Product SKU:  FLKLITE-31x

The Fluke 317 and 319 are designed with ergonomic concepts, shaped to fit your hand and to access tight spots easily. These small and rugged clamp meters are ideally suited for current measurements up to 1000 A (319) in tight cable compartments. The Fluke 317and 319 also offer AC/DC current measurements and has a higher resolution for loads below 40 A. In addition to a compact package with a strong feature set, the Fluke 319 also equip with In-rush current and Frequency functions for testing motors, lighting, etc.

ZAR -1

Fluke 325 True-rms Clamp Meter

sku Product SKU:  FLK-325

Fluke 325 True RMS Clamp Meter offers big AC/DC features in a small form factor

The Fluke 325 Clamp Meter is the top of the 320 Series Clamp Meters. Designed to perform in the toughest environments and provide noise-free, reliable results, you can trust the 325 to help you confidently diagnose all kinds of electrical problems. It features True RMS measurements, optimized ergonomics, a large backlight display, and a rugged compact design to measure current up to 400 A in tight cable compartments. You can also use it to measure temperature, capacitance, AC/DC current and frequency. Commercial and residential electricians use the 325 to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Frequency measurements allow checking of portable generators; dc current testing battery backups and solar storage equipment.

The Fluke 325 comes with a two-year warranty and a soft carrying case.

ZAR -1

Fluke 355 True RMS 2000 A Clamp Meter

sku Product SKU:  FLK-355

Versatile and rugged tools for applications with high currents

Confidently take reliable readings with the True RMS, Fluke 355 digital clamp meter the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.

ZAR -1

Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter

sku Product SKU:  FLK-365

The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365’s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever. Safety Conformance IEC/EN 61010-1:2001, 600V CAT III

 

	FEATURES AND BENEFITS
	200 A ac and dc current measurement with detachable jaw 600 V ac and dc voltage measurement Detachable jaw makes accessing wires and viewing the display easier Built in flashlight/torch allows for easy illumination and identification of wires CAT III 600 V Compact design fits in your hand and can be used while wearing protective equipment State of the art signal processing allows for use in noisy electrical environments while providing stable readings Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement Three-year warranty Soft carrying case
	Safety conformance IEC/EN 61010-1:2001, CAT III 600 V

What’s the difference between the clamp meter models?

	Fluke-365	Fluke-373	Fluke-374	Fluke-375	Fluke-376	Fluke-381
Measure ac current	200.0 A	600.0 A	600.0 A	600.0 A	999.9 A	999.9 A
Measure ac current via iFlex			2500 A	2500 A	2500 A	2500 A
Measure ac voltage	600.0 V	600.0 V	600.0 V	600.0 V	1000.0 V	1000.0 V
Measure continuity	≤ 30 Ω	≤ 30 Ω	≤ 30 Ω	≤ 30 Ω	≤ 30 Ω	≤ 30 Ω
Measure dc current	200.0		600.0	600.0	999.9	999.9
Measure dc voltage	600.0 V		600.0 V	600.0 V	1000.0 V	1000.0 V
Measure resistance	6,000 Ω	6,000 Ω	6,000 Ω	60k Ω	60k Ω	60k Ω
Measure frequency				500 Hz	500 Hz	500 Hz
Measure inrush			100 mS	100 mS	100 mS	100 mS
Work in poorly lit areas	Backlight	Backlight	Backlight	Backlight	Backlight	Backlight
Measure non-linear loads	True-rms	True-rms	True-rms	True-rms	True-rms	True-rms

ZAR -1

Fluke 368 FC Leakage Current Clamp Meter

sku Product SKU:  FLK-368FC

Reduce downtime – Find leakage currents without taking equipment offline.

The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

ZAR -1

Fluke 374 FC True-RMS AC/DC Clamp Meter

sku Product SKU:  FLK-374FC

Fluke 374 FC delivers advanced troubleshooting performance and wireless connectivity

The Fluke 374 FC, part of the Fluke Connect family of wireless test tools, delivers the standard features you need for everyday troubleshooting. Measure AC and DC current to 600 A with the fixed jaw clamp or add an optional iFlex® flexible current probe to measure all the way to 2500 A. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access tightly packed wires. You can also use the 374 FC to measure AC and DC voltage to 1000 V and resistance to 6000 Ω.

Use wireless connectivity to keep a safe distance

The 374 FC is Fluke Connect-enabled to wirelessly transmit results via Bluetooth to Apple and Android devices. That means you can read the results out of the arc flash zone, wearing less PPE. You can even save results to the cloud and create and send reports in email right from the field. Or converse in real-time with ShareLive™ video calls.

Versatile feature set

With True-RMS AC voltage and current measurements, the 374 FC enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittents while you are performing other tasks. The Fluke 374 FC Clamp Meter is the direct replacement for the Fluke 374 Clamp Meter.

Other useful capabilities:

• Compatible with optional TPAK magnetic hanging strap
• Comes with soft carrying case, batteries, and three-year warranty
• Measures capacitance to 1000 µF
• Features CAT III 1000 V, CAT IV 600 V safety rating
• Provides True-RMS voltage and current measurements to accurately measure non-linear signals
• Includes Min/Max/Avg and inrush recording to capture variations automatically
• Runs on two AA alkaline batteries

ZAR -1

TA375 Passive probe

sku Product SKU:  PIC-TA375

Passive oscilloscope probes

Fluke 376 FC True-rms AC/DC Clamp Meter

sku Product SKU:  FLK-376FC

The Fluke 376 FC is part of the Fluke Connect family of wireless test tools. Now you can:

• Log and trend measurements to pinpoint intermittent faults
• Transmit results wirelessly via the Fluke Connect® Measurements app
• Create and send reports right from the field
• Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices

The Fluke 376 FC is the direct replacement for the Fluke 376 Clamp Meter.

ZAR -1

Fluke 378FC Clamp Meter

sku Product SKU:  FLK-378FC

Product overview: Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex

Voltage and current measurements with FieldSense™ technology

The Fluke 378 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Power quality indicator shows whether a problem is in the equipment or the power line

The 378 FC clamp meter includes a unique PQ function that senses power quality issues automatically. When making FieldSense measurements, the 378 FC will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three. Now you can quickly determine if an upstream supply problem exists, or if there is a downstream equipment problem.

Complete 3-phase measurements in quick, easy steps

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Measure extremely high current with iFlex® probe

The included iFlex flexible current probe lets you measure ac current as high as 2500 A. Crowded wiring cabinets and large conductors are easily measured with the iFlex probe.

Easy to see, easy to use with included tools

Your job will get easier when you use the 378 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

Record, analyze, share results with Fluke Connect® software

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

• Save measurements to your phone and the Fluke Cloud, for comparison of readings over time.

ZAR -1

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex

sku Product SKU:  FLK-381

What Once Took Two People, Now Takes One

Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.

The iFlex® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

ZAR -1