Fluke 1535 | 1537

sku Product SKU:  FLK-1535-1537

Fast, accurate, reliable insulation testing in a portable, lightweight package

The Fluke 1535 and 1537 2,500 V Insulation Resistance Testers are engineered to simplify frontline troubleshooting whether you’re on the factory floor or working in the field at a solar installation. With user-selectable test voltages from 250 V to 2,500 V and resistance measurements up to 500 GΩ, these testers allow you to cover more workload with a single tool. Equipped with an intuitive user interface, a short circuit current of up to 5 mA and a CAT IV 600 V rating, these portable high-voltage insulation testers can deliver rapid and stable resistance measurements no matter where you take them. The 1537 Insulation Resistance Tester also allows you to store measurements for later review or PC transfer using the provided software.

• Selectable Voltage Tests: Tailor your tests with user-selectable voltages of 250 V, 500 V, 1000 V, and 2500 V to cover both industrial and solar applications.
• Extended Insulation Resistance Measurement: Reach up to 500 GΩ in insulation resistance measurement for a thorough analysis.
• Intelligent Calculations: Automatically calculate the Polarization Index (PI) and Dielectric Absorption Ratio (DAR), minimizing the influence of environmental factors.
• High Measurement Capacity: Execute up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V on a single charge, enhancing productivity.
• Enhanced Safety Features: Benefit from a CAT IV 600V rating and a built-in voltage alarm function for heightened safety during operations.

The Fluke 1537 has these additional features:

• Extended Measurements: The Fluke 1537 enhances your testing capabilities with AC/DC voltage and resistance measurements.
• Stable Resistance Measurements: Achieve faster, more stable insulation resistance measurements with a short circuit current up to 5mA.
• Fine-tunable Test Voltage: Adjust the test voltage from 250 V to 2500 V in 100 V increments to meet specific testing requirements.
• Dielectric Discharge Rate Calculation: Automatically calculate the dielectric discharge rate (DD) to aid in identifying elusive insulation issues.
• Ramp Test Mode: Linearly increase the applied test voltage 100 V/s to help identify potentially hard to identify fault conditions.
• Visual and Audio Continuity Indicator: Verify continuity visually on the screen display or with the audible indicator so you can focus on your testing procedure without looking at the display.
• Customizable Testing Parameters: Set user-defined labels, adjust test duration, and store measurement results for a tailored testing experience.
• Effortless Data Management: Download and manage data effortlessly with the provided PC software.
• Extended Warranty: Enjoy peace of mind with an extended 3-year warranty.

ZAR 34990,0000

Fluke 355 True RMS 2000 A Clamp Meter

sku Product SKU:  FLK-355

Versatile and rugged tools for applications with high currents

Confidently take reliable readings with the True RMS, Fluke 355 digital clamp meter the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.

ZAR 33390,0000

FLUKE 279FC IFLEX

sku Product SKU:  FLK-279FC-IFLEX

Fluke 279 FC Wireless True-RMS Thermal Digital Multimeter

The 279 FC multimeter is a full-featured multimeter with built-in thermal imager that reveals hot spots that may indicate electrical issues quickly and safely.

Thermal imaging multimeters are a first-line troubleshooting tool for electrical equipment that can check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices and switches. Scanning with the 279 FC's thermal imager reveals many electrical issues rapidly and from a safe distance. By combining two tools into one, this thermal multimeter lightens the load and increases productivity.

Expanded functionality

This digital multimeter is compatible with iFlex® (a flexible current clamp) to expand your measurement capabilities and get into tight, hard to reach spaces for current measurement (up to 2500 A AC). This electrical multimeter has a large full-colour LCD screen makes for easier and clearer viewing of images and readings.

The 10 hour+ rechargeable battery keeps you going all day long under normal conditions.

Communicate your results

With built-in Fluke Connect®, transmit results wirelessly to a smartphone and save time on reporting to validate work is complete. Troubleshoot better by instantly trending and monitoring measurements live on your smartphone screen. Create and email reports right from the field.

Other useful features

• Full-featured electrical multimeter with the built-in thermal imager
• 15 measurement functions including voltage ac and dc, resistance, continuity, capacitance, diode test, Min/Max/Avg, current ac with included iFlex current probe, frequency
• Low-pass filter for troubleshooting adjustable speed drives Thermal imaging reveals hots spots that may indicate electrical issues quickly and safely
• Two-in-one tool is designed to increase productivity – no need to go back to the truck or office to retrieve a shared camera – so you can do more in less time!
• iFlex expands your measurement capabilities – get into tight, hard to reach spaces for current measurement (up to 2500 A ac)
• Save measurements and images while communicating wirelessly with a smart phone up to 20 feet / 6.1 m away (no obstructions)
• 102x77 image resolution offers immediate visual cues of hot, potentially troublesome areas
• 3.5 in /8.89 cm colour LCD screen
• A rechargeable lithium-ion battery allows for a full workday (10+ hours) under normal conditions; a second battery option means you will always have a battery ready to install.
• Three-year standard warranty
• Auto power off to save battery power
• CAT III 1000 V, CAT IV 600 V measurement category
• Designed for durability, built to withstand a 1 m (3 ft) drop, double insulated with raised rubber holster for increased protection

Includes

• 279 FC TRMS Thermal Multimeter
• 45.72 cm (18 in) iFlex Flexible Current Probe
• (1 pair) TL175 Test Leads
• Rechargeable Lithium-Ion Battery and Charger
• Soft Carrying Case
• Hanging strap

ZAR 33190,0000

Fluke 353 True RMS 2000 A Clamp Meter

sku Product SKU:  FLK-353

Versatile and rugged tool for applications with high currents

Confidently take reliable readings with the True RMS, Fluke 353 digital clamp meter; the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.

ZAR 28990,0000

Fluke 368 FC Leakage Current Clamp Meter

sku Product SKU:  FLK-368FC

Reduce downtime – Find leakage currents without taking equipment offline.

The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

ZAR 26990,0000

Fluke 1587 FC Insulation Multimeter

sku Product SKU:  FLK-1587-FC

Keep yourself safe. Find hidden problems faster. Put the paperwork down.

Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily - all at a safe distance.

Add diagnostics with Fluke Connect

The Fluke 1587 FC is Fluke Connect-enabled so you can download the free Fluke Connect® Measurements app to your smartphone and gain additional functions, including:

• Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely.
• Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone.
• Quickly find problems by saving and comparing measurements over time on a wireless device.
• PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster
• Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
• Temperature compensation to establish accurate baselines and relevant historical comparisons
• Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
• Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Provides automated temperature compensation to establish accurate baselines
• Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
• Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
• Includes auto-discharge of capacitive voltage for added user protection
• Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
• Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
• Automatically powers off to save battery power
• Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.

ZAR 26790,0000

Fluke 289 True-RMS Data Logging Multimeter

sku Product SKU:  FLK-289

The Fluke 289 is the next generation high performance industrial logging multimeter. This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. Let the 289 be your watchdog for systems or processes while you are off doing other jobs. It provides the ability to log data and graphically review up 10,000 recorded events and logged readings with on-board TrendCapture. Zoom on trend provides a 14x zoom to view and analyze data—without needing a PC.

Because the 289 is Fluke Connect-compatible you can set it up with the ir3000 FC wireless connector (sold separately) to communicate with your iOS and Android smart devices through the Fluke Connect mobile app and monitor readings from a remote location. Or you can share readings with your team in an instant anytime, from anywhere with ShareLive™ video call. It can help you solve problems faster and minimize downtime.

ZAR 26590,0000

Fluke 88V Deluxe Automotive Multimeter

sku Product SKU:  FLK-88V

The Fluke 88V meter has measurement functions, troubleshooting features, and accuracy levels needed to solve problems on conventional and hybrid vehicles. The 88V is the most powerful automotive multimeter ever offered by Fluke. In addition to standard multimeter features such as the ability to measure voltage, current, continuity, and resistance, the 88V can perform:

Pulse width

Duty cycle

Min/Max/Average recording

Diode tests

The pulse width function provides millisecond resolution for troubleshooting fuel injectors.

Automotive measurements

The 88V meter can take care of many automotive needs, getting into more of the digital multimeters measurement capabilities - it can measure voltage up to 1000 V AC and DC, current up to 10 A, 20 A for up to 30 seconds and frequency to 200 kHz and % duty cycle. Add those features to RPM measurements with optional inductive pickup and millisecond pulse width measurements for fuel injectors to name a few. The 88V comes packed with the functions you need:

Temperature measurements with optional temperature probe

Analog bar graph to track changing or unstable signals

Min/Max/Average recording with Min/Max Alert to capture variations automatically

Peak Min/Max to record transients as fast as 250 μs

88V multimeter designed for the garage

While working in a garage, the large display digits can help you focus on the vehicle while still being able to read the numbers. Plus, the two-level bright white backlight offers the additional visibility you may need.

An optional magnetic hanger lets you hang the meter from most steel surfaces for easy set-up and viewing. The 88V is designed to be used in high energy environments like those found on hybrid vehicles.

The product is supported by a limited lifetime warranty.

ZAR 25990,0000

Fluke 378FC Clamp Meter

sku Product SKU:  FLK-378FC

Fluke 378 FC Clamp Meter – with a FREE Fluke 117 Electricians Multimeter (valid until the 2024.07.31
Product overview: Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex

Voltage and current measurements with FieldSense™ technology

The Fluke 378 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Power quality indicator shows whether a problem is in the equipment or the power line

The 378 FC clamp meter includes a unique PQ function that senses power quality issues automatically. When making FieldSense measurements, the 378 FC will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three. Now you can quickly determine if an upstream supply problem exists, or if there is a downstream equipment problem.

Complete 3-phase measurements in quick, easy steps

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Measure extremely high current with iFlex® probe

The included iFlex flexible current probe lets you measure ac current as high as 2500 A. Crowded wiring cabinets and large conductors are easily measured with the iFlex probe.

Easy to see, easy to use with included tools

Your job will get easier when you use the 378 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

Record, analyze, share results with Fluke Connect® software

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

• Save measurements to your phone and the Fluke Cloud, for comparison of readings over time.

ZAR 24339,0000

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex

sku Product SKU:  FLK-381

What Once Took Two People, Now Takes One

Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.

The iFlex® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

ZAR 23990,0000

Fluke 771 Milliamp Process Clamp Meter

sku Product SKU:  FLK-771

Fluke 771 Milliamp clamp meter saves you time by measuring 4-20 mA signals without breaking the loop

The Fluke 771 delivers all the basics. It measures 4-20 mA signals without "breaking the loop", allowing you to measure low level dc current while saving downtime and money. You can also use it to measure output signals from transmitters without breaking the loop when maintaining and troubleshooting process and automation equipment. This saves time and avoids disruption to the process. For more convenience, the detachable clamp can be attached to the wire you're testing while you move the meter—connected by the extension cable—to a better viewing position. This is especially helpful for taking readings in tight locations.

ZAR 23990,0000

Fluke a3004 FC Wireless 4-20 mA DC Clamp Meter

sku Product SKU:  FLK-a3004

See it. Save it. Share it.

All the facts, right in the field. The Fluke a3004 FC Wireless 4-20 mA Current Clamp Meter is one member of a family of wireless test tools that let you record and log data over time and share test data using the Fluke Connect® app with ShareLive™ video call.

Fluke Connect Wireless Test Tools put tools where measurement access or separation may be an issue. It's simple. Connect the a3004 FC current meter, or any of the other Fluke Connect remote meters, and read the results on the Fluke Connect Wireless Multimeter or a PC from a safe distance.

Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Test or troubleshoot 4-20mA control loops used with drive systems, plc's, or building energy management systems.

• Save time by NOT breaking the loop on 4-20 mA signal measurements.
• Are you spending time:
  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
• Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
• Send data to your laptop and go from logging to analysis and diagnosis.
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data.
• Perform for analysis with your PC and share the results using Fluke Cloud™ storage and ShareLive™ video call. View data or graphs to get input from team members.

ZAR 23490,0000

Fluke 287

sku Product SKU:  FLK-287

Now compatible with Fluke Connect® Mobile App

The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before:

• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• On board help screens for measurement functions.
• Saved measurements allow you to name and recall measurements made in the field.
• Multi-lingual interface.
• Multiple logging sessions possible without download.
• 0.025% basic DC accuracy.
• 100 kHz AC bandwidth.
• Real time clock for automatic time stamping of saved readings.
• True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Temperature function.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements. • Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
• Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.

ZAR 23390,0000

Fluke 393 FC

sku Product SKU:  FLK-393FC

The Fluke 393 FC CAT III 1500 V True-RMS Clamp Meter with iFlex is designed for technicians who work in high voltage dc environments: solar arrays, wind power, electric railways, data centres battery banks for uninterruptible power supplies. The Fluke 393 FC will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw.  The included iFlex flexible current probe extended ac current measurements up to 2500 amps. This clamp has a thin jaw, giving you access to cables in crowded combiner boxes. Test leads are designed with your work in mind and are also rated to CAT III 1500 V dc.

Other key functions:

• IP54 rated, ideal for work outdoors on solar arrays and wind power systems 
• DC power measurement, showing readings in kVA
• Audio Polarity indicator helps prevent accidental misfires
• Visual Continuity turns to provide a bright green light in the display, ideal when working in dark and noisy environments
• Logging and reporting of test results via Fluke Connect software
• When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces.  The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.

The world's first CAT III 1500 V true-RMS clamp meter

ZAR 23190,0000

Fluke 1577 Insulation Multimeters

sku Product SKU:  FLK-1577

Two powerful tools in one

The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

ZAR 21990,0000

Fluke 87V Max

sku Product SKU:  FLK-87VMAX

The Fluke 87V MAX trms multimeter defines a new standard for operating in extreme conditions, with the features and accuracy to troubleshoot most electrical problems, Fluke’s most rugged digital multimeter, the 87V MAX, is a trms multimeter built with an industrial-strength case and a removable holster. The holster doubles as a test probe holder for one-handed operation. Able to withstands drops up to 4 meters (13 feet)IP67 rated, heat and cold, this Fluke digital multimeter is fully waterproof and dustproof to work reliably in all the places that you need to work.

The Fluke 87V MAX TRMS multimeter has an extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C.

Other product highlights

• True-rms ac voltage and current for accurate measurements on non-linear signals
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• Frequency to 200 kHz
• Built-in thermometer conveniently allows you to take temperature readings without carrying a separate instrument.
• Min/Max/Average recording, plus 250 μs Peak min-max to capture variations automatically
• Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment
• This electrical multimeter has large display digits, a 2-level bright white backlight and backlit keypad buttons for increased visibility.
• Hi resolution 19,999 count display mode
• Long battery life (800 hours)

Comparison – 87V MAX multimeter and 87V multimeter
	87V MAX	87 V
IP Rating	IP 67	IP 30
Battery life	800 hours	400 hours
Drop test	4 meters	3 meters
Backlit keypad	Yes	No
TwistGuard™ test leads	Yes	No
True-rms readings	ac	ac
Basic dc accuracy	0.05%	0.05%
Voltage ac/dc	1000 V	1000 V
Current ac/dc	10 A	10 A
Resistance	50 MΩ	50 MΩ
EN61010-1 CAT III	1000 V	1000 V
EN61010-1 CAT IV	600 V	600 V
Warranty (years) Limited lifetime	Limited	Lifetime

 

ZAR 21590,0000

Fluke 28 II

sku Product SKU:  FLK-28-II

The standard for rugged

The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.

Other key capabilities

• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth– 15 Hz to 20 kHz
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max
• Hi resolution 20,000 count display mode
• True-rms ac voltage and current for accurate measurements on non linear signals
• Backlit keypad buttons allow for easy visibility in low-lit areas
• Large display digits and 2 level bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

ZAR 21590,0000

Fluke 27 II

sku Product SKU:  FLK-27-II

The standard for rugged

The Fluke 27 II Digital Multimeter define a the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

ZAR 20990,0000

Fluke 377FC Clamp Meter

sku Product SKU:  FLK-377FC

Voltage and current measurements with FieldSense™ technology

The Fluke 377 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Measure extremely high current with iFlex® probe

Use the included iFlex flexible current probe to measure ac current as high as 2500 A. The iFlex probe provides access to large conductors in tight spaces.

Complete 3-phase measurements in quick, easy steps

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Easy to see, easy to use with included tools

Your job will get easier when you use the 377 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

Record, analyze, share results with Fluke Connect® software

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

ZAR 20990,0000

Fluke 87V IMSK

sku Product SKU:  FLK-87V-IMSK

This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, combined with the i400 AC current clamp. Together they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The kit includes special accessories to make you even more productive on the job and will save over 15% compared with the individually priced items. Plus, you'll be working with the most trusted tools in the world.

Fluke-87V Multimeter has true-rms accuracy and advanced functionality to give you the results you need

• True-rms accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
• Efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations
• A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS
• Lifetime warranty, backed by a brand you trust.

Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter

• The current clamp provides accurate current measurements up to 400 A ac without breaking electric circuits
• Allows taking measurements safely with industry standard safety ratings

Select accessories like temperature probe, test leads and alligator clips

• The 80BK-A DMM Temperature Probe plugs into the 87V’s voltage jacks and allows temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F)
• TL75 Test Leads and AC175 Alligator Clips complete this versatile kit.

Key safety features

• Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
• Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks.

ZAR 20390,0000

Fluke a3003 FC Wireless 2000 A DC Current Clamp Meter

sku Product SKU:  FLK-A3003

See it. Save it. Share it.

All the facts, right in the field. The Fluke a3003 FC Wireless 2000 A DC Current Clamp Meter is one member of a growing family of Fluke wireless test tools that let you record and log data over time, and share test data using the Fluke Connect® app with ShareLive™ video call.

The a3003 is the tool of choice for high current DC ammeter applications that require measurements up to 2000 A DC. The extra-wide jaw easily clamps around large conductors, typically found in mining, utility, marine, rail or other heavy manufacturing industries where large DC currents or large current carrying cables are found. The a3003's unique jaw construction allows for a wide measurement range meaning that you can accurately make measurements from 10 A DC to 2000 A DC.

Fluke Connect Wireless Test Tools put tools, not your body, near hazardous electrical environments or dangerous work locations. It's simple. Connect the a3003 FC DC current meter or any of the other Fluke Connect remote meters, and read the results on the Fluke Connect Wireless Multimeter or a portable PC from a safe distance.

Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Don't get bogged down while isolating intermittent electrical faults.

Timing is everything when trying to find an intermittent problem and the hard part is, it doesn't always show up when you have your meter connected. We've solved that problem with Fluke Connect - leave your remote modules connected to log measurements and walk away to address other issues. You can then download the data for further analysis.

• Send data to your laptop and go from logging to analysis and diagnosis.
• Record over time to monitor circuit load changes for an hour, a shift or a week.
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data.
• Perform for analysis with your PC and share the results using Fluke Cloud™ storage and ShareLive™ video call. View data or graphs to get input from team members.

ZAR 19990,0000

Fluke 1507 Insulation Resistance Tester

sku Product SKU:  FLK-1507

Fluke 87V Industrial Multimeter

sku Product SKU:  FLK-87V

Fluke 87V identifies complex signal problems fast

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS.

Use the 87V to measure AC current up to 10 A directly, or use an optional clamp for high current measurements, frequency to 200 kHz, plus % duty cycle, resistance, continuity and diode test. And it includes a built-in thermometer so you can take temperature readings without having to carry a separate instrument, and more. Plus, with its bright, two-level backlit display you’ll be able to see the results better in dim light.

Correctly measure pulse-width modulated motor drive signals

The Fluke 87V takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high-frequency, high-energy noise generated by large drive systems.

Electrical safety

All the inputs in the 87V are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8000 V.

Other useful features:

• Easy access door for fast battery changes without breaking the calibration seal
• Removable holster with built in test lead and probe storage for convenience
• Audible Input Alert warning against wrong use of input jacks
• Provides peak capture and Min/Max/Avg recording to capture intermittents as short as 250 µS
• Designed and built in the U.S.
• Comes with a lifetime warranty
• Features—6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
• Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Includes an analog bargraph for fast changing or unstable signals
• Presents a large digit display with bright, two-level backlight for easier reading in low light
• Delivers 0.05% DC accuracy
• Measures up to 1000 VAC and DC
• Provides 10,000 µF capacitance range for components and motor caps
• Offers relative mode to remove test lead interference from low ohms measurements
• Features auto and manual ranging for maximum flexibility
• Includes Touch Hold to capture stable readings of noisy signals

ZAR 17290,0000

Fluke 1503 Insulation Resistance Meter

sku Product SKU:  FLK-1503

Fluke 1503 Insulation Resistance Tester handles all the basic insulation testing needs

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

ZAR 17190,0000