PicoScope 2207B with Shipping

sku Product SKU:  QKE20220509-1

ZAR -1

CPD seminar: Earth, Ground & Installation Testing

sku Product SKU:  SEM-CPD-EGITesting

YOU’LL LEARN:
The initial design of an electrical installation from the local transformer to the user facility is usually done with care and attention to the planned energy usage of the facility. However, with time, the system deteriorates, and the electrical activities and energy usage may change radically or may, in fact, become unstable and dangerous, especially if a fault condition occurs.

This one-day technical seminar will review the technology implemented by the various tests that must be done during the design, installation and commissioning phases of a new electrical system.
The second session will look at what is required to maintain a live system to ensure that it operates efficiently and, most importantly, that should a serious fault occur, the system will absorb the fault energy and keep the system safe. 

Tests will be demonstrated on a live installation where possible or alternatively
on a simulated system
 

Details
Space is limited to 25 people per event

Time: 08h30 to 16h00. Lunch and refreshments will be provided

Presenter: Gerrit Barnard

Dates and venues:

• Johannesburg: Comtest House, 10 Enterprise Close, Linbro Park, 2090
  • 2024.04.03
  • 2024.10.12
• Port Elizabeth, venue to be confirmed
  • 2024.04.16
• Cape Town: Loch Wine Estate, Koeberg Road, 7550, Durbanville, Cape Town, South Africa GPS Coordinates: -33.778459° S // 18.640644° E
  • 2024.05.21
• Durban: The Riverside Hotel, 10 Kenneth Kaunda Road, Durban North
  • 2024.07.09
• Kathu, the venue to be confirmed
  • 2024.08.20

Upon attendance of this seminar, you will receive 0,5 CPD Credits (NLA) and/or 1 CPD Credit (ECSA CPD) 
Once payment has been received a link will be sent through for registration.

ZAR -1

Amprobe 2100-Delta

sku Product SKU:  AMP-2100-Delta

Beha-Amprobe is completing the 2100-Series voltage tester range with the 2100-Delta, a rugged feature rich TRMS voltage tester with current-function

Safety rated up to CAT III 1000 V / CAT IV 600 V, makes it the ideal product for troubleshooting in industrial and commercial environments. 
Use it to check voltage, current, resistance, continuity and frequency, all in one instrument. 
Connect the test probes safely to the top of the housing of the instrument when testing for voltage, giving you an extra hand. 
The 2100-Delta simply checks current up to 200A AC by sliding the fixed jaw around the conductor without the need to break the circuit. 
And like the 2100-Alpha, 2100-Beta and 2100-Gamma the 2100-Delta is naturally equipped with reinforced components for dependable performance, it has an ingress protection degree of IP 64, is built according the voltage (current) tester standard EN 61243-3:2014 and is GS approved.

Functions
• Voltage and polarity test TRMS up to 1000 V AC / 1500 V DC
• Current measurement TRMS up to 200 A AC – perfect tool for maintenance and trouble shoot
• Voltage mode to measure AC / DC voltage down to 1 V
• Single pole phase test to determine the phase conductor
• Continuity test (Rx) to check wiring
• Low resistance indication (L Rx) (<20Ω) – most important tool to check wiring in contactor and relay application without influence of the coils
• Phase rotation indication with two probes – no third hand required. Separate indicators for “Right” and “Left” rotation
• Resistance measurement up to 100 kΩ
• Non contact cable break detector / EF (electric field) to locate the exact position of the fault location of a broken phase conductor
• Frequency measurement up to 800 Hz
• Diode test

 

ZAR -1

Amprobe HD110C

sku Product SKU:  AMP-HD110C

The Amprobe HD110C Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. Its made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts.

Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. The HD110C has an extended voltage measurement capability of 1500 V DC and 1000 V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

ZAR -1

Amprobe SOLAR-100 Solar Power Meter

sku Product SKU:  AMP-SOLAR-100

Optimize the placement of solar systems and verify window efficiency. The SOLAR-100 measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.

Applications:

• Windows performance – calculation and verification of the heating or heat reduction caused by direct sunlight
• Solar radiation measurements
• Solar power research for location of the solar panels or solar water heater
• Physics and optical laboratories
• Meteorology
• Agriculture

ZAR -1

Amprobe MLS55-3 Pipe Transmitter for AT-3500

sku Product SKU:  AMP-MLS55-3

The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2″ (5 cm) in diameter.

ZAR -1

Amprobe AM-510 Commercial/Residential Multimeter

sku Product SKU:  AMP-AM-510

Compact yet tough, the Amprobe AM-510 autoranging digital multimeter delivers rugged, accurate performance for light commercial and advanced residential applications like rewiring an electrical panel, installing heated floors and light fixtures, troubleshooting and repairing home appliances, electrical sockets, and automotive electrical problems. Its CAT III safety rating and ease of use make it ideal for high voltage multimeter applications. Innovative digital multimeter features expedite go/no-go checks, and the built-in flashlight makes it easy to see wires and fuses in the dark. Plus a rubber tilt stand and a probe holder give you a “third-hand” when you need it.

ZAR -1

AM-500-EUR

sku Product SKU:  AMP-AM-500

Easy to use digital multimeter designed for the homeowner or light commercial maintenance person to check for voltage in receptacles, extension cords, light fixtures, batteries and other electrical circuits. Quickly troubleshoot fuses, light bulbs and continuity of electrical connections. Easily verify voltage levels of automotive batteries and troubleshoot electrical issues in vehicles,

ZAR -1

AM-520-EUR

sku Product SKU:  AMP-AM-520-EUR

The Beha-Amprobe AM-500-EUR Digital Multimeter Series, a full line of digital multimeters that offer functions for every application. These tough meters are designed to be a reliable, feature-rich, and rugged solution for taking critical measurements in residential, HVAC, electrical and industrial settings at breakthrough affordability.

ZAR -1

AM-540-EUR

sku Product SKU:  AMP-AM-540-EUR

The Beha-Amprobe AM-500-EUR Digital Multimeter Series, a full line of digital multimeters that offer functions for every application. These tough meters are designed to be a reliable, feature-rich, and rugged solution for taking critical measurements in residential, HVAC, electrical and industrial settings at breakthrough affordability.

ZAR -1

Amprobe HD160C

sku Product SKU:  AMP-HD160C

The Amprobe HD160C Heavy Duty Multimeter is designed for professional use in harsh environments. Its made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts.

Built with tough, fire-retardant thermoplastic that is resistant to grease and chemical spills and with shock-mounted components that are drop resistant to at least 8 feet, the Amprobe HD160C is unusually rugged and reliable.. It has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV, and it also measures temperature.

ZAR -1

Amprobe LAN-1 LAN Cable Tester

sku Product SKU:  AMP-LAN-1

The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations, and works with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.

ZAR -1

Amprobe SC-600 Signal Clamp

sku Product SKU:  AMP-SC-600-EUR

In many situations, it is either not possible to gain access to a cable for making an electrical contact or it is not safe to do so. The SC-600 Signal Clamp accessory provides an efficient and safe method of applying a locate signal to a cable, enabling the UAT-600 Transmitter to induce a signal through the insulation into the wires or pipes. The clamp works on low impedance closed circuits only.

The SC-600 is included with the UAT-620 Underground Utilities Locator kit.

ZAR -1

Amprobe Multifunction Installation Tester

sku Product SKU:  AMP-Proinstall-100-EUR

The Telaris Multifunction Tester Series offers two models that verify the safety of electrical installations in residential, commercial and industrial applications. The Telaris ProInstall series has been developed to carry out the following safety measurements of electrical installations in accordance with EN 61557 and DIN VDE 0100: Insulation resistance, RCD tests, Low Ohm resistance, Earth ground resistance, Loop impedance, Phase sequence.

ZAR -1

Amprobe MT204-S

sku Product SKU:  AMP-MT204-S

• Earth bond resistance measurement with 10 A AC or 0.2 A AC Loop / mains impedance measurement up to 440V
• Display of prospective short circuit current
• Insulation resistance measurement with 250 V to 500 V test voltage (adjustable)
• Residual voltage measurement Display of the discharge voltage / discharge time
• Integrated high-voltage test (can be switched off by means of a key switch)
• Easy operation using the rotary switch and the START/STOP button

 

ZAR -1

Amprobe SM-10 Sound Meter

sku Product SKU:  AMP-SM-10

The Amprobe SM-10-A Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control.

They use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94 dB 1 kHz etc).

ZAR -1

Amprobe SM-20A Sound Meter

sku Product SKU:  AMP-SM-20A

The Amprobe SM-20A Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control. The SM-20A offers a PC interface.

They use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94 dB 1  kHz, etc).

ZAR -1

Amprobe TACH-20 Contact and Non-Contact Tachometer

sku Product SKU:  AMP-TACH-20

The Amprobe TACH20 Hand-held Tachometer accurately measures rotational or surface speed as well as length. It comes with a large LCD display that allows the user to easily read the measurement. It also has a built in memory function that permits automatic storage of maximum, minimum, average values plus the last measurement displayed.

The TACH20 Tachometer is supplied with all the necessary accessories designed with optimal mechanical stability to ensure accurate, reliable, and repeatable measurements. In addition to the mechanical adapter that accepts a variety of tips, as well as the surface speed wheel for contact rpm measurement, the TACH20 Tachometer can perform non-contact measurement by using the infrared beam function.

ZAR -1

Amprobe TACH-10 Contact and Non-Contact Tachometer

sku Product SKU:  AMP-TACH-10

Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems

ZAR -1

Proinstall-200-EUR

sku Product SKU:  AMP-Proinstall-200-EUR

The Telaris Multifunction Tester Series offers two models that verify the safety of electrical installations in residential, commercial and industrial applications. The Telaris ProInstall series has been developed to carry out the following safety measurements of electrical installations in accordance with DIN VDE 0100 and EN 61557: Insulation resistance, RCD tests, Low Ohm resistance, Earth ground resistance, Loop impedance, Phase sequence.

ZAR -1

Calog LC II

sku Product SKU:  CALOG-LCII

The Calog Loadcell II Calibrator is ideal for testing 4 and 6 wire loadcells, checking insulation breakdown, weighing system calibration and simulation.

It can test a loadcells' zero balance, input resistance, output resistance, bridge balance, 50V DC insulation test from bridge to shield, bridge to housing and shield to housing.

The Calog Loadcell II Calibrator is a hand-held precision calibrator specifically designed for load cell testing, including insulation breakdown and weighing system calibration or simulation. Simply connect a strain-guage load cell to the spring terminals and press "TEST LOADCELL". The backlit graphics will display four or six wire, zero balance, input or output resistance and bridge balance. It can then carry out a 50 VDC insulation test form bridge to shield, bridge to housing and shield to housing.

For system testing and calibration the  Calog Loadcell II Calibrator can simultaneously measure mV (with mass display), excitation voltage and mA. In source mode, used for load cell amplifier pre-calibration testing, it can source mV (with mass display), measure excitation and measure mA. In simulate mode it sources a mA signal to the control room or SCADA. The display can be in mA, mA and mass or mass and mA.

ZAR -1

Calog Temp

sku Product SKU:  CALOG-TEMP

The CALOG-TEMP, Multi-Function Temperature Calibrator is a high-precision, hand-held calibrator for the calibration and troubleshooting of process control instrumentation. The CALOG-TEMP simultaneously measures and sources ten types of thermocouples and seven resistance temperature detectors (RTD), whilst automatically capturing the calibration results. It measures milliamps whilst sourcing or simulating millivolts, TCs, RTDs or ohms to calibrate transmitters. The CALOG-TEMP logging facility stores data on the SD card supplied, which is easily downloaded to a PC via the onboard USB port and usable in most of the common spreadsheet formats. The trend feature is ideal for graphing temperature profiles and PID controller optimization with a programmable timebase. In addition, the CALOG-TEMP has the functionality necessary to install and maintain all powered and non-powered transducers using the built-in 24V loop power supply. The CALOG-TEMP is the economical choice for people wanting to do industrial field or workshop calibration.

ZAR -1

Calog Loop II

sku Product SKU:  CALOG-LOOPII

The Calog LOOP II is a high precision, multi-function, hand-held calibrator designed for the process control industry. It’s speciality is milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured

ZAR -1

Calog - LC Display

sku Product SKU:  CALOG-LCDISPLAY

The Calog-LC Display is a portable, hand held unit which is able to display a Load cell value.The Lithium Ion battery makes it possible to use the calibrator for a reasonable period of time as a portable load cell indicator in industrial plants or emergency situations.For longer applications, such as with a cattle scale, auxiliary power can be supplied via an external 12volt battery, charger or car cigarette lighter socket. In order to display mass, force, strain or torque from load cells the unit allows you to set the sensitivity in mV/V, range, decimal points and units.Zero trim can offset deadweight and span trim is available to increase the reading accuracy with the help of calibrated weights. Selections of software options such as tare, peak hold and auto zero maintenance are included. The indicator can be used for one 350 Ohm or three 1000 Ohm load cells with a fixed 5Vdc excitation.

ZAR -1