Fluke Calibration MET/CAL® Calibration Management Software

sku Product SKU:  FCAL-METCAL-Software

Fluke Calibration MET/CAL® Warranted Calibration Procedures

sku Product SKU:  FCAL-METCAL-Warranty

MET/CAL® warranted procedures are optional calibration procedures for MET/CAL® Plus Calibration Software. This class of MET/CAL® procedures, produced by Fluke Precision Measurement engineers, is designed to satisfy your need for ready-to-go, fully tested calibration procedures.

MET/CAL® calibration procedures are warranted by Fluke Calibration to produce valid calibrations on the intended device under test (DUT) for the specified model and revision level. The warranty assures you of Fluke Calibration's full support for the original, unaltered procedure.

Once installed and operational, these procedures automate the calibration process under MET/CAL control as described in the DUT's service documentation. In many cases, multiple procedures are provided for each model to provide "verification only" and "adjustment" procedures. Multiple procedures also may be provided which give you a choice of different standards to perform the calibration.

ZAR -1

Franklin Electric INCON Optimizer 3

sku Product SKU:  FRA-INCO-OPTIMISER-3

The INCON® Optimizer3 Circuit Breaker Monitor delivers advanced automated reporting of all critical circuit breaker diagnostics to ensure uptime and facilitate predictive maintenance. The Optimizer3 is ideal for high-voltage, live or dead-tank, oil, vacuum or gas circuit breakers. 

ZAR -1

Franklin Electric INCON 1250B

sku Product SKU:  FRA-1250B-U-W-Y

The 1250B is a versatile programmable position monitor. Its main application is for Transformer LTC position monitoring, but its non-linear conversion table gives it the ability to convert non-linear rotary motion into a linear scale for additional applications.

ZAR -1

Franklin Electric INCON 1511 LTC

sku Product SKU:  FRA-1511-LTC-U-W-Y

The 1511-LTC provides basic LTC tap position monitoring using the LTC’s slide wire position feedback device. As the LTC changes taps, the moveable contact picks up the voltage divided through the resistors in the slide wire, so that each tap has its own specific voltage.

ZAR -1

Bird 300-WA Series

sku Product SKU:  BIR-300-WA Series

300-WA Series, 300 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quailty, robust construction and conservative power ratings.

ZAR -1

300-WA Series

sku Product SKU:  BIR-300-WA Series

300-WA Series, 300 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quailty, robust construction and conservative power ratings.

ZAR -1

1000-A Series

sku Product SKU:  BIR-1000-A Series

1000-A Series, 1000 Watt RF Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

1000-WA Series

sku Product SKU:  BIR-1000-WA Series

1000-WA Series, 1000 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

8327-300

sku Product SKU:  BIR-8327-300

8327-300, Tenuline^® RF Power Attenuators are a valuable and reliable accessory for reducing power levels and VSWR, for isolating components under test, for harmonic signal analysis, and as comparison standards. Bird's RF attenuators are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

Bird SK-4500-TC

sku Product SKU:  BIR-SK-4500-TC

No More Swapnostics!

The SK-4500-TC provides critical coverage with a wide frequency range from 1 MHz to 4.5 GHz.

Discontinuities can be a real problem and cause significant reflections by damaged cables, loose or improperly installed connectors, and environmental factors. With Bird’s DTF (Distance to Fault) mode, SiteHawk finds the exact location of the problem “in true distance units”!

Eliminate wasted time swapping out components until you determine the issue. Save critical time, components, and money by correctly identifying issues the first time to efficiently direct vital resources to implement solutions.

ZAR -1

Bird SK-6000-TC

sku Product SKU:  BIR-SK-6000-TC

The SK-6000-TC provides critical coverage with a wide frequency range from 1 MHz to 6 GHz.

Discontinuities can be a real problem and cause significant reflections by damaged cables, loose or improperly installed connectors, and environmental factors. With Bird’s DTF (Distance to Fault) mode, SiteHawk finds the exact location of the problem “in true distance units”!

Eliminate wasted time swapping out components until you determine the issue. Save critical time, components, and money by correctly identifying issues the first time to efficiently direct vital resources to implement solutions.

ZAR -1

Bird RH-RR-KIT

sku Product SKU:  BIR-RH-RR-KIT

Signal Maintenance - On Track!

Bird’s new Railway RF Cable & Antenna Analyzer solution provides a comprehensive kit that allows technicians to maintain high-quality service networks in the railway industry. Based on the need for redundant communications, Bird’s Cable & Antenna Analyzer increases reliability and assures maintainability for communication protocols targeted in railway space. Designed to help novice and expert users, our easy-to-use analyzer finds problems before they become time-consuming, expensive repairs.

Bird’s RailHawk™ RF Railway Test Kit, is the result of combining the proven antenna and cable testing functionality of the SiteHawk handheld analyzer, Bird’s plug and play power sensor – designed specifically to test the UHF analogue/digital radio systems, as well as the GSM-R/LTE-R voice/data systems - and all the necessary loads, adapters and cables into a single rugged transit case.

Avoid communication shortfalls, downtime and expense resulting from trial and error of swapping components to fix your issue.

ZAR -1

Bird FH-AV-KIT

sku Product SKU:  BIR-FH-AV-KIT

Minimize AOG Downtime

Avoid the Aircraft on Ground (AOG) downtime and expense that results from trial and error testing and component swapping.

Bird’s FH-AV-KIT, FlightHawk™ RF Aviation Test Kit combines a unique set of components specifically designed for avionics testing and measurement. In a single rugged case, the kit includes the proven antenna and cable testing functionality of the FlightHawk™ handheld analyzer, Bird’s wideband power sensor – designed specifically to test aircraft RF systems and power measurement, and all necessary adapters and cabling. In addition, Bird’s easy to use aviation testing software will allow anyone on the maintenance team to test and verify all antenna systems in the fleet.

The Aviation Test Kit offers an intuitive user experience for both experienced and beginner RF maintenance crews. Based on aircraft OEM specifications, technicians can locate RF cable, connector and antenna problems at the source with clear visual indicators as to the pass/fail status of the system.

ZAR -1

SH-60S-TC

sku Product SKU:  BIR-SH-60S-TC

Carry Precision With You

The SH-60S-TC provides real-time spectrum monitoring and analysis of RF frequency circuits with a wide frequency range of between 9kHz to 6 GHz. Our analyzer has been developed for field engineers, technicians, wireless equipment manufacturers, service providers, contractors, tower erectors and military field personnel.

Bird combines best-in-class functionality with compact package and boasts an intuitive touchscreen user interface. SH-60S-TC let’s you experience high performance and rich features that are available wherever you take it.

Signal bursts and transients can be viewed using the “Zero-span” function with video-level triggering (i.e. an oscilloscope with time on the x-axis) or “Waterfall” display (color-coded scrolling chart display) to analyze intermittent signal sources.

ZAR -1

SH-60S-AOA

sku Product SKU:  BIR-SH-60S-AOA

Defeat RF Interference

The SH-60S-AOA provides the ability to triangulate the location of an interferer on a map for signals between 9 kHz and 6 GHz. Integrating digital maps, GPS location and signal strength vectoring, the SignalHawk AOA provides an easy-to-use interface to pinpoint potential in-band interferers, “rogue” broadcast locations and dead spots.

Field engineers, technicians, wireless equipment manufacturers, service providers, contractors, and military personnel can triangulate the source of an interferer by utilizing our AOA (Angle of Arrival) technology. Being highly portable allows the user to go remote locations to accurately pinpoint the signal origination. In today’s crowded RF spectrum this cutting edge technology can quickly and efficiently stop unwanted, accidental or prohibited interface that can degrade RF communication or completely disrupt signal quality and system performance.

ZAR -1

3141

sku Product SKU:  BIR-3141

3141, Channel Power Monitor Display monitors all aspects of your LMR system. Continuously monitor radio performance, combiner loss and antenna/feedline characteristics to identify and alarm on critical changes. With the data logging function, long term performance monitoring can be used to identify changes before they negatively impact system enabling your preventative maintenance team to address problems before they occur. Solutions are available for the entire range of land mobile radio frequencies from 144 MHz to 940 MHz.

Setup and monitoring is simple with the built-in web server available anywhere there is an internet connection and a web browser, so it is as close as the computer on your desk or your mobile phone using our Android app. Receive SNMP alerts or just check up on your system at your convenience.

ZAR -1

2-A Series

sku Product SKU:  BIR-2-A Series

2-A Series, 2 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

2-6A Series

sku Product SKU:  BIR-2-6A Series

2-6A Series, 2 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

2-18A Series

sku Product SKU:  BIR-2-18A Series

2-18A Series, 2 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

3-A Series

sku Product SKU:  BIR-3-A Series

3-A Series, 3 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

3-A-MFB-K1

sku Product SKU:  BIR-3-A-MFB-K1

3-A-MFB-K1, 3 Watt RF Power Attenuator Kit consists of four BNC male/female connector attenuators each rated at 3, 6, 10, and 20 dB values. Included is a high impact resistant plastic case with pre-cut foam.

This cost-effective kit can be used by installers, technicians and engineers to determine exact dB values needed for transmit, receive or measurement systems as an alternative to more costly variable attenuators. Consult our factory for special dB value combinations.

ZAR -1

5-18A Series

sku Product SKU:  BIR-5-18A Series

5-18A Series, 5 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.

ZAR -1

5-A Series

sku Product SKU:  BIR-5-A Series

5A Series, 5 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quailty, robust construction and conservative power ratings.

ZAR -1