Fluke FEV300 test adapter kits for electric vehicle charging stations

219  219   

Fluke’s FEV300 Test Adapter Kits, are designed to test the function and safety of charging stations mode 3 for AC charging. The adapter imitates an electric vehicle and opens up a charging cycle (activating voltage/current output), allowing users to conduct tests in combination with appropriate test instruments like an installation tester (for example, the Fluke 1664 FC) and/or an oscilloscope (for instance the Fluke 120B Series Industrial ScopeMeter®). With the FEV300 Adapter Kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 regulations.

Features and functions:

• Suitable to vehicle charging stations with charging mode 3
• Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
• PE Pre-Test: With this safety feature, the PE conductor will be tested for the possible presence of dangerous voltage against earth.
• Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch, the adapter can simulate various current capabilities of charging cables.
• Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector, all charging states can be simulated.
• Separate phase indication by three LED lamps for easy check if the voltage is present at the charging output.
• Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests.
• Compatibility: Integrates into Fluke portfolio of test and measurement tools, allowing direct connection through FEV measurement terminals.
• The Fluke 1664 FC allows safety measurements via the measuring terminals like:
• • earth bond
  • insulation
  • loop/line impedance and RCD trip test
• Simulation of CP error state “E”
• Simulation of PE error state “F” (Earth fault)
• Terminals for CP signal output to check the communication between the adapter (simulated electric vehicle) and charging station, this can be measured by a ScopeMeter® or multimeter. The voltage level defines the charging modes, and the duty cycle of this PWM (Pulse Width Modulation) signal represents the maximum allowable charging current.
• IP 54 rating - Dust and splashing water protected