Fluke Pro, Jason Axelson explains why early identification of battery failure helps keep your assets as well as your company up and running.

Use a battery tester to measure voltage, internal resistance, and strap resistance to find indications of early-stage battery failure or installation problems.

Key measurements – Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency, and temperature.

Sequence measurement mode – Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance, and temperature (with BTL21 intelligent test probe), eliminating the need to press a button each time measurement needs to be saved.

Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on-the-go analysis.

Learn more about the Fluke 500 Series Battery Analyzer: https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-500-series-battery-analyzer

Shaun from Fluke educates us why an insulation tester is a crucial tool to have. He elaborates on the benefits yield by the insulation meter.

Check out our insulation testers and see what they do: https://comtest.co.za/Online-Store/Ca...
-----------------------------------------------------------
Why do you need an insulation tester?
The insulation tester is designed to check the integrity of conductors wires or check the insulation value of motor/compressor windings. We check if there is a breakdown in there that might cause malfunctioning. Insulation tester is helpful for a preventive maintenance plan (PMP) it allows you to do a streamlined test and baseline test.

hether you’re surveying, installing, executing maintenance or checking the performance of solar panels or a photovoltaic system, the Fluke irradiance meter takes 4 critical measurements needed.

With the Fluke irradiance meter, you can make instantaneous measurements to determine the watt per square meter solar irradiation. Measure the ambient temperature at the panel easier and faster than ever.

The Fluke IRR1-SOL is the only irradiance meter that can take the temperature without needing an external probe. This is enabled by innovative Fluke technology which embeds an integrated conductive temperature sensor in the meter. Temperature can also be measured with increased accuracy with the external temperature probe.

+ A built-in compass enables you to measure and document roof or site orientation.

+ An inclination sensor lets you know the solar panel tilt when surveying, installing or adjusting the installation.

+ The Fluke irradiance meter is robust, rugged, compact, and ergonomically designed so it fits comfortably in your hand.

+ The high contrast LCD and large, readable numbers make the screen easy to see even in bright sunlight.

+ It comes with a convenient carry case with a shoulder strap.

Get all the critical photovoltaic measurements needed to install, verify, and report on the performance of a photovoltaic system in one easy-to-use instrument.

ttps://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-flk-irr1-sol

The Fluke T6-1000 Electrical Tester with FieldSense™ technology lets you quickly, safely take True rms voltage and current measurements without test leads.

https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-t6-1000-pro

Use the integrated compass on the Fluke IRR1-SOL Irradiance Meter to measure and document roof or site orientation.

+ First perform irradiance, temperature and inclination measurements with the meter turned on and aligned with the panel.

+ If the tilt is above 20 degrees, any compass reading will be inaccurate. The metal in the panel or other surrounding metal objects will also affect the compass reading. This is why another step is necessary to verify the direction.

+ Position the meter away from the panel and any other metal objects and with the tip of the meter facing in the same direction as the panel.

+ Confirm your compass reading.

Find out more:
https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-flk-irr1-sol

The Fluke IRR1-SOL Irradiance Meter has a built-in inclination sensor that lets you know the roof or solar panel tilt when surveying, installing or adjusting the installation.

+ Simply place the Irradiance Meter directly onto the solar panel to get accurate tilt.

+ For surfaces of rooftops with inclinations different than 0°, place the meter on the ground and push the ZERO button for 2 seconds to reset the angle.

+ Then, measure the true inclination of the solar panel.

Get 4 critical photovoltaic measurements in one easy-to-use tool when surveying, installing or adjusting your solar installation. Visit Fluke.com to find out more.

Learn more about the Fluke IRR1-SOL Irradiance Meter: https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-flk-irr1-sol

he IRR1 irradiance meter is the perfect tool to conduct comprehensive tests and measurements on photovoltaic systems. It provides four key measurements all in one tool: irradiance, temperature, tilt, and compass degree.

Irradiation is a critical metric to consider when conducting a survey or inspection of a solar installation.

1. IRRADIANCE: The Fluke IRR1 irradiance meter instantaneously measures solar irradiance up to 1400 watts per square meter. In addition to irradiance, solar professionals need to measure the temperature of the surfaces of a photovoltaic panel.

+ TEMPERATURE: The Fluke irradiance meter comes with an integrated temperature sensor that allows users to measure the top of a solar panel, simply by placing the unit on the surface. To measure the temperature of the back of the panel, the Fluke Irradiance Meter comes with an attachable, external probe.

+ TILT: Tilt angle of a solar panel is important to maximize efficiency. Identify the ideal inclination of a panel by enabling the tilt function. For scenarios where the rooftop is not level, use the Zero function to calculate the real tilt.

+ COMPASS DEGREE: The location and direction of a panel determines the amount of irradiation absorbed. Get the direction of the panel in degrees by using the compass function on the IRR1 irradiance meter.

https://comtest.co.za/Products-Paid/Product-Details-Paid/fluke-flk-irr1-sol

Even if a solar or photovoltaic system is installed correctly, it may not be producing the specified amount of power. Determine the performance of a solar panel with the Fluke IRR1-SOL Irradiance Meter.

+ Simply place the Fluke irradiance meter directly onto the solar panel.

+ The meter will instantly and precisely display the watt per square meter measurement.

+ The irradiance meter makes it easy to ensure you’re getting the optimum power from your system and also makes it simple to report and document.

+ The irradiance meter also includes a temperature sensor, compass and inclination sensor.

https://comtest.co.za/Products-Paid/P...​

The Fluke T6-1000 PRO Electrical Tester measures voltage up to 1000 V ac and current up to 200 A ac, all through the open fork and without test lead contact to live voltage. Connect the black lead to the ground with the included heavy-duty alligator clip, slide the wire into the open fork and see both voltage and current at the same time. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A and 1000 Vac. Even with gloves on. It will change how you do your job.

The world’s only CAT III 1500 V current clamp, Fluke 393FC with iFlex is designed for technicians who work in dc environments up to 1500V.

The Fluke 393 FC features:
- IP54 rating for dust and water makes it ideal for work outdoors on solar arrays and wind power systems.
- DC power measurement, showing readings in kVA.
- Audio and Visual Polarity to ensure photovoltaic panels are properly - installed with the help of an audio beep and a light to indicate correct polarity.
- Visual Continuity provides a bright green indicator light in the display for working in dark and noisy environments.
- Logging, sharing and reporting of test results via Fluke Connect software.