Fluke 1623-2 GEO Earth Ground Resistance Meter

sku Product SKU:  FLK-1623-2

Fluke 1623-2 Basic Kit II Geo Earth Ground Tester LIMITED STOCK going for R32 990 Ex VAT

Fluke 1623-2 Earth Ground Tester performs all four ground tests quickly and accurately.

The Fluke 1623-2 earth ground tester measures earth ground loop resistances using only clamps, only stakes, or one clamp and stakes. With the stakeless test method, the Fluke 1623-2 is able to measure earth ground loop resistances for multi-grounded systems using only current clamps. This technique eliminates the dangerous, and time-consuming job of disconnecting parallel grounds, and finding suitable locations for auxiliary ground stakes. You can use it to perform earth ground tests in places you’ve not considered before, such as inside buildings, on power pylons, or anywhere you don’t have access to soil.

Keep your options open

Keep in mind, the stakeless test method works only if a bonded earth ground system exists for the building or structure under test. If there is only one path to ground, typical with many residential applications, you will need to use the fall-of-potential test method that requires stakes.

The 1625-2 is also very easy to use. World class accessories speed set up and test time. And the tester tells you which stakes or clamps to connect for each test. The large rotary switch and buttons are easy to operate even with a gloved hand. And you can store up to 1,500 records and access them easily via the USB port.

Fluke 1623-2 GEO Earth Ground Tester Kits

The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World-class accessories will simplify and speed up testing time.

Fluke 1623-2-Kit GEO Earth Ground Tester summary

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stateless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

Fluke 1623-2 Basic Kit Geo Earth Ground Tester, Kit / no clamps

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

Need even more accuracy? Check out the 1625-2 that offers:

• Automatic Frequency Control identifies existing interference and chooses a measurement frequency to minimize its effect, thus providing a more accurate earth ground value.
• R* measurement that calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see.

Other useful capabilities:

• Includes USB port for data storage and transfer
• Works with world-class that speed set up and test time
• Comes with a rugged carrying case

ZAR -1

Fluke 1670 Series

sku Product SKU:  FLK-167x

The Fluke 1670 Series Multifunction Installation Testers will revolutionize the way you work. With an ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity (1673 FC and 1674 FC), and comprehensive reporting software, the 1670 Series sets the new standard for an integrated installation testing solution.

Reliable installation testing is essential for ensuring the safety, optimal functionality, and integrity of a facility’s electrical systems. The 1670 Series' rugged design allows you to verify the safety of electrical installations in domestic, commercial, and industrial applications while meeting the requirements of IEC/HD 60364-6 and all relevant local installation test standards.

With the 1670 Series, you’ll be able to perform your required testing faster and reduce the time you spend on documentation, all while having the ultimate confidence in the data you’re collecting.

Simplified User Interface and Testing Setup

The 1670 Series takes data management to the next level streamlining test set up and preparation with an advanced bidirectional user interface. When setting up your project, the hierarchical tree topology for clients, sites, distribution boards, circuits, and test points can be easily customized using the high-resolution color touchscreen, a smart device, or by PC. Edit, add, delete, or modify information directly on the tool as you test to ensure accurate data, or transfer updates to your tester via the Fluke Connect™️ mobile app or TruTest™️ desktop software. Easy-to-read test tables help you quickly see that you are capturing the right measurement data at the right test point, every time. Now you can spend less time setting up your tester and organizing data, giving you more time to perform valuable testing.

Perform All Required Tests up to 30% Faster

Installation testing can be a time-consuming process. It often requires repetitive, manual test setups that can be frustrating and introduce the opportunity for errors.

The Fluke 1670 Series leverages a unique Auto Test function (1673 FC / 1674 FC) that enables you to run through an entire installation test sequence at the touch of a button. An integrated help function provides a visual connection guide to help ensure measurement success. Automatic measurement validation, with user-defined limit warnings, compares test results to the relevant standards and provides you with an immediate visual pass/fail indication to quickly identify potential issues. Eliminating manual testing and automating measurement validation means you can perform your tests up to 30% faster, giving you more time to focus on other critical tasks and increasing your productivity.

* 30% faster testing compared to manual testing.

Reduce Documentation and Reporting Time up to 50%

The Fluke 1670 Series Multifunction Installation Testers help you reduce documentation time by up to 50%. Link test results to the circuit or point under test, reducing manual data entry and recordkeeping. You can also preview inspection results in the field via the tester, a smart device, or PC, and Fluke Connect compatibility making it easy to store, manage, and share your data from the field. Fluke TruTest Software lets you generate inspection certificates on site with just a few simple steps, so you can finalize and invoice your inspection at the time of service. The Fluke Connect mobile app enables you to document and input all relevant photos and inspection notes, so you can complete your work on site, eliminating extra work at the office.

* 50% faster reporting and documentation based on customer interviews.

Insulation PreTest™️ Functionality

The Fluke 1674 FC includes a patented Insulation PreTest, so you can better protect the installation and avoid costly mistakes. If the tester detects that appliances are connected to the system during the test, it will stop the insulation test and provide a visual and audible warning. This helps eliminate accidental damage to peripheral equipment and saves you both time and money.

Optimized Software and Reporting

Fluke TruTest Software simplifies electrical system data management and reporting, eliminating the hassle of traditional data management with a single, integrated Fluke solution. Proper data management and testing information is critical for producing easy-to-understand reports for clients or your management team. TruTest streamlines the process by allowing you to create and transfer testing metadata between the software and your installation tester using a USB-C interface cable, or via the Fluke Connect mobile app, which helps you ensure accurate results.

The user-friendly interface, intuitive workflow, and report builder means that you can quickly format your measurement data into printable test certificates and reports, complete with your company logo and electronic signature. The live onscreen dashboard allows you to see the status of all your clients instantly and navigate to further levels of detail if desired.

Fluke TruTest Software allows you to create certificates that are compliant with a growing list of regional reports, including BS7671, DIN VDE 0100-600, ÖVE/ÖNORM E 8101, NIN/NIV, NEN3140, and other European installation test standards. All these reports are available at the touch of a button, and a pre-configured international template ensures that TruTest Software has you covered no matter your location.

Fluke Connect Compatibility

Enhance the functionality of the 1673 FC and 1674FC Installation Testers with the Fluke Connect mobile app, eliminating tedious data entry and optimizing data management with cloud storage. The Fluke Connect mobile app wirelessly synchronizes measurement data from your installation tester for later export to TruTest desktop software, allowing for prompt and effective reporting even on location. Use the Fluke Connect app to create projects and upload them to your 1673 FC and 1674 FC for streamlined data management. Construct distribution boards and circuits to send to your tester, using this data to guide your testing regime. With the Fluke Connect app, you can also take photos with your smart device and assign them, along with notes, to specific test points or assets, creating detailed visual inspection reports.

With the powerful Fluke Connect ecosystem of test tools, you can take your troubleshooting and reporting to the next level. Connect additional test tools, like the Fluke 369 FC Leakage Current Clamp or the Fluke 1630-2 FC Earth Ground Clamp, to synchronize data between auxiliary devices and test points, providing your clients a clearer picture of overall facility health.

Additional Capabilities

• Field updatable — you can apply any changes to regulations or enhancements to the tester in the field.
• Compact and lightweight (less than 1.6 kg), with a padded neck strap to free your hands.
• Full-colour touch screen and tactile rotary knob for fast navigation, with no complex multi-level menus.
• Rechargeable 2,500 mAh Li-ion battery to cover a full day of testing.
• Standard USB-C charging Port with fast charging support for convenient on-the-go charging.
• Newly designed professional hard case for transporting and protecting your installation tester and accessories.
• Additional high current loop mode for faster measurements than loop tests with non-trip mode for RCD protected circuits.
• Insulation Monitoring Devices (IMD) tests.
• Surge Protection Device (SPD) functional test.
• Voltage drop measurement function.
• Z Max memory for loop tests to support easy evaluation of the highest loop test value.
• Unique zero adapter for fast, reliable, and accurate test lead and mains cord compensation.
• Simultaneous readings of voltage measurements between L-N, L-PE, and N-PE using the mains cord. No need to change measurement connections.
• RCD trip current and trip time measurement in parallel (RCD type AC, A, B, F and GFCI).
• PEFC or PSC and loop impedance measurement in parallel are displayed together on the dual display.
• Ring testing lets you select the required input sockets without exchanging test leads.
• Continuity test with low test current (10 mA) to measure motor windings.
• Earth Volt Touchpad detects raised earth voltages > 50 V, indicating potentially dangerous situations.

 

What's in the box:

• Multifunction installation tester
• Heavy duty mains cord with single input connector
• Hard case
• USB-C
• Power adapter for charging
• Remote control probe
• Hanging strap
• Zero adapter
• Test leads and probes
• Alligator clips
• Li-Ion battery

ZAR -1

Fluke 283 FC/PV

sku Product SKU:  FLK-283FC-PV

Unmatched safety and convenience for solar professionals

The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC Digital Multimeter and a283 FC True-RMS Wireless Current Clamp set the new standard for technicians in DC environments up to 1500 V. Whether you’re working with a utility-scale solar photovoltaic (PV) array, wind power, an electric railway, or a data centre, the Fluke 283 FC has been engineered to enhance safety and increase productivity while giving you accurate, reliable, and repeatable results.

The 283 FC/PV includes CAT III 1500 V DC safety-rated accessories so you can work confidently in higher voltage environments without compromising safety. Staubli MC4 test leads allow you to quickly make reliable, secure connections to modules or strings to test DC voltage up to 1500 V DC. TL175-HV CAT III 1500 V/CAT IV 1000 V rated silicone test leads give you more flexibility when testing voltage, millivoltage, resistance, continuity, or capacitance on inverters, combiner boxes, PV arrays, or individual PV modules. A bright backlit LCD screen and illuminated keypad make working in direct and low-light conditions easier. The included magnetic hanging kit frees up your hands, and the custom hard carrying case protects your investment while transporting it.

Additional features:

• Highly accurate voltage measurements for precise frontline troubleshooting
• Current measurements up to 60 A AC/DC for safely troubleshooting individual strings of modules with greater accuracy (when using a283 FC wireless current clamp)
• Visual and audio polarity indicators help prevent accidental module wiring issues
• User-defined limit gauge helps you make quick go/no-go troubleshooting decisions
• Unique multimeter readiness self-check helps ensure your meter is ready to test
• Save and log measurements to internal memory and view them on your mobile device via Fluke Connect™

CAT III 1500 V / CAT IV 1000 V Safety Rated

CAT III 1500 V DC systems are now a standard in utility-scale PV systems, offering significant cost savings and efficiency improvements to facility owners. These systems operate at higher voltage levels, allowing each inverter to handle more energy, enabling longer strings of connected panels, and reducing the need for additional wiring and inverters. Consequently, standard CAT IV inverter outputs of 800 V AC or higher are more prevalent, making it crucial to prioritize safety and accuracy in measurements.

The CAT III 1500 V / CAT IV 1000 V rated 283 FC multimeter and a283 FC wireless current clamp meet the safety requirements for test equipment (IEC 61010-2-032) corresponding to the overvoltage category level of the PV array electrical installation (IEC 61730-1). Combine these with CAT III 1500 V / CAT IV 1000 V rated TL175-HV Premium Silicone Test Leads, CAT III 1500 V MC4 connectors and you’ve got a comprehensive frontline troubleshooting solution that offers safe and accurate voltage measurement for troubleshooting everything from the inverters, combiners, strings of modules, or individual modules.

User-Defined Limit Gauge

On large-scale PV projects where you’re taking repetitive measurements and expect consistent results, the user-defined limit gauge becomes a vital time-saving tool. The adjustable limit gauge can trigger audio and visual indications whenever a measurement falls outside your expected range. This saves you time letting you quickly evaluate measurement results, increasing your confidence in the system's performance, and helping to identify potential issues that need to be addressed.

With the dedicated limit gauge button, you can easily turn the limit gauge warnings on and off, set up new measurement parameters, or select from previously used parameter profiles. This customization streamlines troubleshooting, allowing you to quickly identify measurement deviations or errors, and helps maintain optimum solar installation performance.

Unique Multimeter Readiness Self-Check

The size and location of utility-scale solar sites can present unique challenges whether they’re logistical, environmental, or testing related. Because of that, you want to have confidence that your meter is fully functional, capturing the right data every time so you don’t have to do the same job twice. The 283 FC features a unique integrated multimeter readiness self-check, that ensures your meter is in proper working order before you take your next reading. This quick self-check is an additional readiness test that gives you valuable insight to the status of your meter’s calibration, battery life availability, test lead functionality, and AC/DC voltage measurement functionality so you can be confident that your meter is ready to work when you are.

Wireless Current Clamp

The a283 FC True-RMS wireless current clamp is designed to simplify the troubleshooting process without compromising on safety and reliability. It can measure both AC and DC current up to 60 A, ensuring precise and reliable readings for a wide range of applications including solar installations, electrical systems, and industrial equipment. With its non-contact design, the clamp allows for safe connections without the need to touch live wires, enabling you to close the clamp in a cabinet and take measurements from a safe distance. It carries a CAT III 1500 V, CAT IV 1000 V rating that matches the safety rating of the 283 FC.

Wireless connectivity allows for convenient transmission of measurements, eliminating the hassle of tangled wires and allowing you to install the current clamp in an enclosure so you can safely measure at a distance. The clamp has a thin jaw design to ensure easy access to combiner boxes and tight spaces, enhancing overall efficiency in your measurement process.

Voltage and Current at the same time

With the 283 FC digital multimeter and a283 FC wireless current clamp, you can measure voltage and current at the same time and automatically calculate VA power. This eliminates the hassle of having to change your measurement setup to capture both measurements and eliminates the need to manually calculate power in the field. Voltage and current are time-stamped, eliminating any concerns about potential disparities being caused by environmental factors. You can also view more than one measurement at a time allowing you to monitor additional parameters like DC amperage or voltage, giving you even more insights into system performance.

Logging / saving

The 283 FC offers convenient logging and saving features that set it apart from other digital multimeters. With a built-in real-time clock, each measurement can be time- and date-stamped for accurate recordkeeping. The multimeter has internal memory to save and log measurements, which can then be easily transferred to Fluke Connect for further analysis. Additionally, you have the flexibility to customize logging durations and intervals, ensuring the logging process matches the specific needs of the system you are testing.

Fluke Connect™ with Fluke Cloud™ Storage

Fluke Connect™ compatibility provides convenient features to enhance your troubleshooting experience. As part of the Fluke Connect family, the 283 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. No need to write down the results. Trend and monitor measurements live on your phone screen and upload those measurements to the cloud. Combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues with ShareLive™ video calls or email. The table view feature organizes measurements, notes, and images in a clear and efficient manner, making it easier to reference data, identify issues, and generate reports for customers. Fluke Connect™ with Fluke Cloud™ Storage streamlines your workflow and ensures accurate data storage and organisation.

ZAR -1

Fluke 110

sku Product SKU:  FLK-110

Product overview: Fluke 110 True-rms Digital Multimeter

Compact true-rms meter for accurate electrical installation and troubleshooting

The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The 110 is for professional use, where true-rms accuracy is needed.

Key product capabilities

• True-rms ac voltage for accurate measurements on non-linear signals
• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Min/Max/Average to record signal fluctuations
• CAT III 600 V safety rated

ZAR -1

Fluke 1550C

sku Product SKU:  FLK-1550-C

Fluke 1550C 5 kV Insulation Tester makes data collection from insulation tests easy

The Fluke 1550C performs digital insulation testing up to 5 kV, and makes data collection easy through the Fluke Connect™ wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos. It’s the perfect tool for preventive or predictive maintenance programs designed to identify potential equipment failures before they occur. And it comes with a three-year warranty and CAT IV 600 V safety rating.

Additional product capabilities will become available throughout 2018 and beyond.

ZAR -1

Fluke 378FC Clamp Meter

sku Product SKU:  FLK-378FC

Product overview: Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex

Voltage and current measurements with FieldSense™ technology

The Fluke 378 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Power quality indicator shows whether a problem is in the equipment or the power line

The 378 FC clamp meter includes a unique PQ function that senses power quality issues automatically. When making FieldSense measurements, the 378 FC will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three. Now you can quickly determine if an upstream supply problem exists, or if there is a downstream equipment problem.

Complete 3-phase measurements in quick, easy steps

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Measure extremely high current with iFlex® probe

The included iFlex flexible current probe lets you measure ac current as high as 2500 A. Crowded wiring cabinets and large conductors are easily measured with the iFlex probe.

Easy to see, easy to use with included tools

Your job will get easier when you use the 378 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

Record, analyze, share results with Fluke Connect® software

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

• Save measurements to your phone and the Fluke Cloud, for comparison of readings over time.

ZAR -1

Fluke 87V IMSK

sku Product SKU:  FLK-87V-IMSK

This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, combined with the i400 AC current clamp. Together they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The kit includes special accessories to make you even more productive on the job and will save over 15% compared with the individually priced items. Plus, you'll be working with the most trusted tools in the world.

Fluke-87V Multimeter has true-rms accuracy and advanced functionality to give you the results you need

• True-rms accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
• Efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations
• A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS
• Lifetime warranty, backed by a brand you trust.

Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter

• The current clamp provides accurate current measurements up to 400 A ac without breaking electric circuits
• Allows taking measurements safely with industry standard safety ratings

Select accessories like temperature probe, test leads and alligator clips

• The 80BK-A DMM Temperature Probe plugs into the 87V’s voltage jacks and allows temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F)
• TL75 Test Leads and AC175 Alligator Clips complete this versatile kit.

Key safety features

• Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
• Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks.

ZAR -1

Fluke 175

sku Product SKU:  FLK-175

FLUKE 279FC IFLEX

sku Product SKU:  FLK-279FC-IFLEX

Fluke 279 FC Wireless True-RMS Thermal Digital Multimeter

The 279 FC multimeter is a full-featured multimeter with built-in thermal imager that reveals hot spots that may indicate electrical issues quickly and safely.

Thermal imaging multimeters are a first-line troubleshooting tool for electrical equipment that can check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices and switches. Scanning with the 279 FC's thermal imager reveals many electrical issues rapidly and from a safe distance. By combining two tools into one, this thermal multimeter lightens the load and increases productivity.

Expanded functionality

This digital multimeter is compatible with iFlex® (a flexible current clamp) to expand your measurement capabilities and get into tight, hard to reach spaces for current measurement (up to 2500 A AC). This electrical multimeter has a large full-colour LCD screen makes for easier and clearer viewing of images and readings.

The 10 hour+ rechargeable battery keeps you going all day long under normal conditions.

Communicate your results

With built-in Fluke Connect®, transmit results wirelessly to a smartphone and save time on reporting to validate work is complete. Troubleshoot better by instantly trending and monitoring measurements live on your smartphone screen. Create and email reports right from the field.

Other useful features

• Full-featured electrical multimeter with the built-in thermal imager
• 15 measurement functions including voltage ac and dc, resistance, continuity, capacitance, diode test, Min/Max/Avg, current ac with included iFlex current probe, frequency
• Low-pass filter for troubleshooting adjustable speed drives Thermal imaging reveals hots spots that may indicate electrical issues quickly and safely
• Two-in-one tool is designed to increase productivity – no need to go back to the truck or office to retrieve a shared camera – so you can do more in less time!
• iFlex expands your measurement capabilities – get into tight, hard to reach spaces for current measurement (up to 2500 A ac)
• Save measurements and images while communicating wirelessly with a smart phone up to 20 feet / 6.1 m away (no obstructions)
• 102x77 image resolution offers immediate visual cues of hot, potentially troublesome areas
• 3.5 in /8.89 cm colour LCD screen
• A rechargeable lithium-ion battery allows for a full workday (10+ hours) under normal conditions; a second battery option means you will always have a battery ready to install.
• Three-year standard warranty
• Auto power off to save battery power
• CAT III 1000 V, CAT IV 600 V measurement category
• Designed for durability, built to withstand a 1 m (3 ft) drop, double insulated with raised rubber holster for increased protection

Includes

• 279 FC TRMS Thermal Multimeter
• 45.72 cm (18 in) iFlex Flexible Current Probe
• (1 pair) TL175 Test Leads
• Rechargeable Lithium-Ion Battery and Charger
• Soft Carrying Case
• Hanging strap

ZAR -1

Fluke 377FC Clamp Meter

sku Product SKU:  FLK-377FC

Voltage and current measurements with FieldSense™ technology

The Fluke 377 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Measure extremely high current with iFlex® probe

Use the included iFlex flexible current probe to measure ac current as high as 2500 A. The iFlex probe provides access to large conductors in tight spaces.

Complete 3-phase measurements in quick, easy steps

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Easy to see, easy to use with included tools

Your job will get easier when you use the 377 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

Record, analyze, share results with Fluke Connect® software

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

ZAR -1

Fluke 1550C 5 kV Insulation Tester Kit

sku Product SKU:  FLK-1550C-Kit

The Fluke 1555 and Fluke 1550C, combined with the ir3000 FC Connector and Fluke Connect App, are designed to improve worker safety and save time while conducting insulation on high-voltage equipment including switchgear, motors, generators, and cables.

Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with the best in class, 3-year warranty, and CAT IV 600 V safety rating. With measurement storage, a PC interface, and the ability to store, share and analyze measurements through Fluke Connect, the 1555 and 1550C are perfect tools for pre-ventative or predictive maintenance programs designed to identify potential equipment failures before they occur.

The Fluke Connect mobile app is an easy-to-use, advanced wireless system for capturing and trending anomalies for troubleshooting, commissioning, and preventative maintenance of insulation resis-tance applications.*

ZAR -1

Fluke 1555 10 kV Insulation Tester

sku Product SKU:  FLK-1555

Perform tests, collect data wirelessly and from a safe distance

The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing high voltage equipment including switchgear, motors, generators, and cables.

Combining the unit with the ir3000 FC, data collection is easy using the Fluke Connect® wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos. The 1555 insulation tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.

ZAR -1

Fluke 1555 10 kV Insulation Tester Kit

sku Product SKU:  FLK-1555-KIT

Evaluate the trends, eliminate the doubt

The Fluke 1555 insulation resistance tester kit offers digital insulation testing up to 10 kV in an industrial strength case, with all the heavy duty leads and clips you need. Plus, the Fluke Connect wireless app performs tests and collects data while you stay a safe distance away.

Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos.

Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.

ZAR -1

Fluke 1503 Insulation Resistance Meter

sku Product SKU:  FLK-1503

Fluke 1503 Insulation Resistance Tester handles all the basic insulation testing needs

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

ZAR -1

Fluke T6-1000 PRO

sku Product SKU:  FLK-T6-1000PRO

Product overview: Fluke T6-1000 PRO Electrical Tester

Voltage and current on one screen

The T6-1000 PRO Electrical Tester measures voltage up to 1000 V ac and current up to 200 A ac, all through the open fork and without test lead contact to live voltage. Connect the black lead to ground with the included heavy-duty alligator clip, slide the wire into the open fork and see both voltage and current at the same time. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A and 1000 V ac. Even with gloves on. It will change how you do your job.

Key functions

• Simultaneous voltage and current display–save time by seeing voltage and current measurements at the same time when trouble shooting motors, pumps or other equipment
• Visual Continuity™–When checking continuity, the screen automatically turns green while the beeper is on. Perfect for those times when it’s too loud to hear the beeper, when you’re wearing ear protection or when it’s too dark to easily read the screen. Visual Continuity takes the guesswork out of checking continuity.
• True-rms – Accurate voltage and current measurements, even when measuring complex signals.
• FieldSense™ technology for ac voltage, current and frequency measurement without making electrical contact to live voltage

Other capabilities

• 1 to 1000 V ac or dc
• 0.1 to 200 A ac
• Resistance 1 Ω to 100 kΩ
• Frequency measurement 45 Hz to 66 Hz through open fork
• Works with most wire up to AWG 4/0 (17.8 mm/0.7” jaw opening)
• HOLD button temporarily freezes the screen for easy viewing
• Easy to read display with backlight
• Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
• Standard two-year warranty; extendable to 4 years through product registration within 45 days of purchase *

Fluke FLK-IRR1-SOL

sku Product SKU:  FLK-IRR1-SOL

Product overview: Fluke FLK-IRR1-SOL Solar Irradiance Meter

If you’re surveying, installing, executing maintenance or checking performance of solar panels or a photovoltaic system, the Fluke IRR1-SOL Irradiance Meter gives you the 4 critical measurements needed all in one easy-to-use tool. Make instantaneous measurements to determine the watt per square meter solar irradiation, required by IEC 62446-1 standard. Measure temperature by either placing the meter directly on the panel or by connecting the external probe. Find cardinal direction with the compass, and verify inclination of a roof or panel with the tilit function. Get all the critical photovoltaic measurements needed to install, verify and report on the performance of a photovoltaic system in one instrument.

ZAR -1

Fluke 177

sku Product SKU:  FLK-177

Product overview: Fluke 177 True-RMS Digital Multimeter

Fluke 177 True-RMS Digital Multimeter delivers the right features for electrical maintenance experts

With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke 177 Includes all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

With the Fluke 177 Digital Multimeter you get True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging, and frequency, capacitance, resistance, continuity, and diode measurements. In addition, the Fluke 177 provides 0.09% basic accuracy, a digital display with analog bar graph and backlight. Plus a limited lifetime warranty.

Other useful features:

• Features digital display with backlight for working in dim lighting
• Allows closed case calibration through front panel
• Features an ergonomic case with integrated protective holster
• Comes with a limited lifetime warranty

ZAR -1

Fluke PRV240FS Proving Unit

sku Product SKU:  FLK-PRV240FS

Product overview: Fluke PRV240FS Proving Unit

Designed for safety and compliance
Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before tests are performed*.  Additionally, the PRV240FS also provides ac and dc voltages for other HiZ instruments in your tool box.
 
A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools.
 
*PPE is still needed for absence of voltage testing when appropriate.
 
“Test Before Touch”
Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

ZAR -1

Fluke 6200-2 UK Portable Appliance Tester Starter Kit

sku Product SKU:  FLK-6200-2 UK

Fluke 6200-2 UK Starter Kit contains:

• 6200-2 Portable appliance tester
• IRP1, Register For Pat ( Log Book )
• EXTL 100, Extension Lead Test Adaptor
• FAIL250, Label
• Pass 560R, Appliance Pass Labels, A5 sheet round

ZAR -1

Fluke 1507 Insulation Resistance Tester

sku Product SKU:  FLK-1507

Fluke 325 True-rms Clamp Meter

sku Product SKU:  FLK-325

Fluke 325 True RMS Clamp Meter offers big AC/DC features in a small form factor

The Fluke 325 Clamp Meter is the top of the 320 Series Clamp Meters. Designed to perform in the toughest environments and provide noise-free, reliable results, you can trust the 325 to help you confidently diagnose all kinds of electrical problems. It features True RMS measurements, optimized ergonomics, a large backlight display, and a rugged compact design to measure current up to 400 A in tight cable compartments. You can also use it to measure temperature, capacitance, AC/DC current and frequency. Commercial and residential electricians use the 325 to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Frequency measurements allow checking of portable generators; dc current testing battery backups and solar storage equipment.

The Fluke 325 comes with a two-year warranty and a soft carrying case.

ZAR -1

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex

sku Product SKU:  FLK-381

What Once Took Two People, Now Takes One

Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.

The iFlex® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

ZAR -1

Fluke 1587 FC Insulation Multimeter

sku Product SKU:  FLK-1587-FC

Keep yourself safe. Find hidden problems faster. Put the paperwork down.

Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily - all at a safe distance.

Add diagnostics with Fluke Connect

The Fluke 1587 FC is Fluke Connect-enabled so you can download the free Fluke Connect® Measurements app to your smartphone and gain additional functions, including:

• Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely.
• Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone.
• Quickly find problems by saving and comparing measurements over time on a wireless device.
• PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster
• Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
• Temperature compensation to establish accurate baselines and relevant historical comparisons
• Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
• Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Provides automated temperature compensation to establish accurate baselines
• Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
• Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
• Includes auto-discharge of capacitive voltage for added user protection
• Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
• Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
• Automatically powers off to save battery power
• Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.

ZAR 23122,0000

Fluke a3004 FC Wireless 4-20 mA DC Clamp Meter

sku Product SKU:  FLK-a3004

See it. Save it. Share it.

All the facts, right in the field. The Fluke a3004 FC Wireless 4-20 mA Current Clamp Meter is one member of a family of wireless test tools that let you record and log data over time and share test data using the Fluke Connect® app with ShareLive™ video call.

Fluke Connect Wireless Test Tools put tools where measurement access or separation may be an issue. It's simple. Connect the a3004 FC current meter, or any of the other Fluke Connect remote meters, and read the results on the Fluke Connect Wireless Multimeter or a PC from a safe distance.

Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Test or troubleshoot 4-20mA control loops used with drive systems, plc's, or building energy management systems.

• Save time by NOT breaking the loop on 4-20 mA signal measurements.
• Are you spending time:
  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
• Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
• Send data to your laptop and go from logging to analysis and diagnosis.
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data.
• Perform for analysis with your PC and share the results using Fluke Cloud™ storage and ShareLive™ video call. View data or graphs to get input from team members.

ZAR -1