Fluke Calibration 6270A

sku Product SKU:  FCAL-6270A

The Fluke Calibration 6270A Pressure Controller / Calibrator is a robust, reliable solution that lets you dramatically simplify the task of pneumatic pressure calibration. Thanks to its modular design, it is so flexible that it can be configured to meet a wide variety of needs and budgets, and expanded to cover a very broad workload, at purchase or later as your needs change and grow.

The 6270A pressure calibrator is ideal for pressure sensor manufacturers who want to avoid downtime on the production line and need a pressure source that performs both quickly and accurately. Its modular design makes it easy to maintain; its high-speed control and accuracy over a wide range give these manufacturers the throughput they require.

Managers and technicians in calibration laboratories and instrument shops appreciate the 6270A calibrator’s control precision and accuracy over a wide pressure range, which enables them to calibrate a wide range of devices with a single calibrator. They also like the contamination prevention option that provides an important safeguard against that pervasive hazard.

The 6270A is easy to learn and use, thanks to a graphical user interface and an intuitive hardware design.

ZAR -1

Fluke Calibration 7312 Triple Point of Water Maintenance Bath

sku Product SKU:  FCAL-7312

Keep your cells up and running reliably for weeks at a time

• Maintains TPW cells for up to six weeks
• Optional immersion freezer for simple cell freezing
• Independent cutout circuit protects cells from breaking

Maintain two triple point of water cells for weeks in a Fluke Calibration 7312 temperature bath or maintain Gallium cells for your fixed point calibrations. This temperature bath can be used as a calibration bath from –5 °C to 110 °C.

ZAR -1

Microchip Technology BlueSky GNSS Firewall

sku Product SKU:  MIC-BlueSkyGNSSFirewall

Protects GNSS Systems against spoofing and jamming threats

The vulnerability of GNSS systems to various signal incidents is well documented. The rapid proliferation of GNSS systems has embedded these vulnerabilities into critical national infrastructure as well as corporate infrastructures that rely on GNSS-delivered position, navigation and timing (PNT) for daily operations. The widespread deployment of GNSS makes it impractical to replace all fielded GNSS systems in a timely or cost-effective manner.

Netscout HS Series for Test Lab Automation

sku Product SKU:  NET-HS-Series

With the HS-3200 for Test Lab Automation, you can automate your lab with speeds up to 100GbE. And it supports all your different media types – including Multimode and Single Mode, and DAC and AOC, all in a single chassis that integrates seamlessly into your test environment.

ZAR -1

Netscout OS Series for Test Lab Automation

sku Product SKU:  NET-OS-Series

Netscout Specta2

sku Product SKU:  NET-Specta2

Requirements for testing communications systems have never been more diverse. With applications moving to the cloud, traditional test labs are evolving to adapt to a cloud-native environment while maintaining effective lifecycle testing.

Spectra2 is used to test cloud-native 5G core networks and traditional VoIP, IMS, WebRTC and PSTN networks and applications.

ZAR -1

Midtronics DCA-8000 Dynamic Diagnostic Charging System

sku Product SKU:  MID-DCA-8000

Midtronics products are designed to meet a variety of battery and electrical system service requirements, but selected features on individual products may make them a better fit for your unique service applications. This product is particularly well-suited for these battery management processes: warrant management, service diagnostics, vehicle arrival inspection, pre-delivery inspection and lot management.

Using the built in 300A (optional 500A) load, DCA-8000 mimics a start event and then charges the battery to verify the battery can support advanced vehicle system applications like start-stop. This enables DCA-8000 to more accurately judge true battery condition.

Combined with Conductance Profiling™, DCA-8000 ensures service readiness for emerging vehicle systems, battery types, and new points of battery failure.

ZAR -1

Ametek Mx Series

sku Product SKU:  AME-MX-Series

The California Instruments MX Series consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications.

This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the California Instruments MX series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the MX15, MX22.5, MX30, or MX45 unit to its designated location (using included casters), plug it in, and the MX series is ready to work for you.

Simple Operation
The MX Series can be operated completely from its menu driven front panel controller. A backlit LCD display shows menus, setup data, and read-back measurements. IEEE-488, RS232C, USB and LAN remote control interfaces and instrument drivers for popular ATE programming environments are available. This allows the MX Series to be easily integrated into an automated test system.

For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and current waveform capture.

Configurations
The MX15 delivers up to 15 kVA of single phase output. The MX22.5, MX30 and MX45 deliver up to 22.5 kVA, 30 kVA and 45 kVA, respectively. These operate using single or three phase output in AC or AC+DC mode. In DC mode, 50% of the AC power level is available.. On MX-P models, AC+DC mode is also supported.

For higher power requirements, the MX90 and MX135 models are available. Multi cabinet MX45 systems always operate in three phase output mode. Available reconfigurable MX90 and MX135 models (-MB designation) provide
multiple controllers which allow separation of the high power system into two or three individual MX45 units for use in separate applications. This ability to reconfigure the system provides an even greater level of flexibility not commonly found in power systems.

Product Evaluation and Test
Increasingly, manufacturers of high power equipment and appliances are required to fully evaluate and test their products over a wide range of input line conditions. The built-in output transient generation and read-back measurement capability of the MX Series offers the convenience of a powerful, and easy to use, integrated test
system.

ZAR -1

Ametek RS Series

sku Product SKU:  AME-RS-Series

The RS Series consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications.

This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the RS series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the RS unit to its designated location (using included casters), plug it in, and the RS series is ready to work for you.

Simple Operation
The RS Series can be operated completely from its menu driven front panel controller. A backlit LCD display shows menus, setup data, and read-back measurements. IEEE-488, RS232C, USB and LAN remote control interfaces and instrument drivers for popular ATE programming environments are available. This allows the RS Series to be easily integrated into an automated test system. For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and current waveform capture.

Configurations
The RS90 delivers output up to 90kVA in AC mode and 65% of rated power in DC and AC+DC mode.

For higher power requirements, the RS180, RS270, RS360, RS450 and RS540 models are available. Available reconfigurable RS models (-MB designation) provide multiple controllers which allow separation of the high power system into up to six individual RS90 units for use in separate applications. This ability to reconfigure the system provides an even greater level of flexibility not commonly found in power systems.

Product Evaluation and Test
Increasingly, manufacturers of high power equipment and appliances are required to fully evaluate and test their products over a wide range of input line conditions. The built-in output transient generation and read-back measurement capability of the RS Series offers the convenience of a powerful, and easy to use, integrated test system.

Regenerative, bidirectional “Green” Power Solution

The RS Series features the ability to both source and sink current, i.e. bi-directional current flow. The RS amplifier is designed to reverse the phase relationship between the AC input

Avionics
With an output frequency range to 819 Hz (or 905 Hz with -HF option), the RS Series is well suited for aerospace applications. Precise frequency control and accurate load regulation are key requirements in these applications. The available IEEE-488 remote control interface and SCPI command language provide for easy integration into existing ATE systems. The RS Series eliminates the need for several additional pieces of test equipment, saving cost and space. Instrument drivers for popular programming environments such as National Instruments LabView™ are available to speed up system integration.

Regulatory Testing
As governments are moving to enforce product quality standards, regulatory compliance testing is becoming a requirement for a growing number of manufacturers. The RS Series is designed to meet AC source requirements for use in compliance testing such as IEC 61000, 3-2, 3-3, 3-11, 3-12, to name a few.

Choice of voltage ranges
The RS Series includeds 150V and 300V line to neutral. These models provide 3 phase output capability of 260 Vac or 520 Vac line to line respectively.

For applications requiring more than 300 V L-N (or 520 V L-L), the optional -HV output transformer provides an additional 400 V L-N and 693 V L-L output range for use in AC mode only.

High Crest Factor
With a crest factor of up to 3.6, the RS Series AC source can drive difficult nonlinear loads with ease. Since many modern products use switching power supplies, they have a tendency to pull high repetitive peak currents. The RS90 can deliver up to 720 Amps of repetitive peak current (150 V AC range) per phase to handle high crest factor three phase loads.

Remote Control
Standard RS232C & USB IEEE-488 along with optional LAN remote control interfaces allow programming of all instrument functions from an external computer. The popular SCPI command protocol is used for programming.

Application Software
Windows® application software is included. This software provides easy access to the power source's capabilities without the need to develop any custom code. The following functions are available through this GUI program:

• Steady state output control (all parameters)
• Create, run, save, reload and print transient programs
• Generate and save harmonic waveforms
• Generate and save arbitrary waveforms
• Measure and log standard measurements
• Capture and display output voltage and current waveforms
• Measure, display, print and log harmonic voltage and current measurements [iX only]
• Display IEEE-488 or RS232C bus traffic to and from the AC Source to help you develop your own test programs.

1. Requires PC running WindowsXP™ or Windows 2000™ / 2007.

Harmonic Waveform Generation
Using the latest DSP technology, the RS Series programmable controller is capable of generating harmonic waveforms to test for harmonics susceptibility. The Windows Graphical User Interface program can be used to define harmonic waveforms by specifying amplitude and phase for up to 50 harmonics. The waveform data points are generated and downloaded by the GUI to the AC source through the remote interface. Up to 200 waveforms can be stored in nonvolatile memory and given a user defined name for easy recall.

All RS Series configurations offer three phase waveform generation, allowing independent phase anomalies to be programmed. It also allows simulation of unbalanced harmonic line conditions.
 

Arbitrary Waveform Generation
Using the provided GUI program or custom software, the user also has the ability to define arbitrary AC waveforms. The arbitrary waveform method of data entry provides an alternative method of specifying AC anomalies by providing specific waveform data points. The GUI program provides a catalog of custom waveforms and also allows real-world waveforms captured on a digital oscilloscope to be downloaded to one of the many AC source's waveform memories. Arbitrary waveform capability is a flexible way of simulating the effect of real-world AC power line conditions on a unit under test in both engineering and production environments.

RS Series - AC and DC Transient Generation
The RS Series controller has a powerful AC and DC transient generation system that allows complex sequences of voltage, frequency and waveshapes to be generated. This further enhances the RS's capability to simulate AC line conditions or DC disturbances. When combined with the multiphase arbitrary waveform capabilities, the AC and DC output possibilities are truly exceptional. Transient generation is controlled independently yet time synchronized on all three phases. Accurate phase angle control and synchronized transient list execution provide unparalleled accuracy in positioning AC output events.

Transient programming is easily accomplished from the front panel where clearly laid out menu's guide the user through the transient definition process.

RS Series - Measurement and Analysis
The RS Series is much more than a programmable AC, DC or AC+DC power source. It also incorporates an advanced digital signal processor based data acquisition system that continuously monitors all AC source and load parameters. This data acquisition system forms the basis for all measurement and analysis functions. These functions are accessible from the front panel and the remote control interface for the RS Series.

Conventional Measurements [All controllers]
Common AC and DC measurement parameters are automatically provided by the data acquisition system. These values are displayed in numeric form on the front panel LCD display. The following measurements are available: Frequency, Vrms, Irms, Ipk, Crest Factor, Real Power (Watts), Apparent Power (VA) and Power Factor.

Harmonic Analysis
The RS Series provides detailed amplitude and phase information on up to 50 harmonics of the fundamental voltage and current (up to 16 kHz). Harmonic content can be displayed in both tabular and graphical formats on the front panel LCD for immediate feedback to the operator. Alternatively, the included GUI program can be used to display, print and save harmonic measurement data. Total harmonic distortion of both voltage and current is calculated from the harmonic data.

Waveform Acquisition
The measurement system is based on real-time digitization of the voltage and current waveforms using a 4K deep sample buffer. This time domain information provides detailed information on both voltage and current waveshapes. Waveform acquisitions can be triggered at a specific phase angle or from a transient program to allow precise positioning of the captured waveform with respect to the AC source output. The front panel LCD displays captured waveforms with cursor readouts. The included GUI program also allows acquired waveform data to be displayed, printed, and saved to disk.

ZAR -1

Ametek AC eLoad - 3091LD

sku Product SKU:  AME-AC-eLOAD-3991LD

The 3091LD is designed to provide precisely controlled, non-linear loads for testing AC power generation equipment such as UPS’s and AC sources. In addition, any active or passive current carrying devices such as switches, circuit breakers, fuses, connectors and power semiconductors can be tested. Traditionally, many of these products are tested using resistive load banks. This approach does not simulate real-world conditions such as switching DC/AC converters found in many AC powered products. This type of conventional testing does not fully exercise the equipment under test (EUT) under worst case operating conditions. High peak currents and low power factor loads can significantly impact the operating characteristics of a UPS or AC power product. The 3091LD AC Load can simulate high crest factor and variable power factor load conditions. This provides an effective method of testing AC products against real-world conditions and can significantly increase product reliability. Unless properly exercised, product defects may go undetected until a unit is used at a customer site, resulting in costly field returns.

ZAR -1

Ametek PLA

sku Product SKU:  AME-PLA

Traditional DC Electronic Load Solutions are bulky and large in size. Most are offered with standard voltage, current and power ratings. In the ATE world, rack space is a highly coveted asset and application demands are constantly diversifying with new technology development.

AMETEK Programmable Power's PLA Series of “Air-cooled” DC Electronic Electronic Loads offers the industry’s smallest footprint, the highest power density and current rating, along with the broadest selection of high voltage models on the market. PLA models are capable of being custom-tailored to meet your application requirements.

ZAR -1

Ametek Spacecraft Power Bus Simulator

sku Product SKU:  AME-SPBS

Features
Bus simulator includes BPMU and SPU

• Provides enhanced measurement and data-logging of up to 40 channels.
• Bus Power Monitoring Unit (BPMU) can be easily relocated to TVAC chamber to ease cabling complications
• Data can be viewed either in spreadsheet or graphical format
• Spacecraft (Payload) Protection Unit (SPU) provides 10 μsec reaction to out-of-tolerance conditions

ZAR -1

Ametek Power Special Test Equipment (PSTE)

sku Product SKU:  AME-PSTE

The Elgar Power Special Test Equipment (PSTE) provides programmable DC power, and programmable loading, to the electrical systems of satellites for system functional testing.

There are several key benefits of the PSTE. First, it is a complete turnkey system that is capable of operating locally through a simple GUI interface or remotely via a host computer as a single Ethernet address. The spacecraft engineer who defines the spacecraft power bus limits, cabling scheme, mode simultaneity matrix, and system behavior based upon limit conditions implements the real intelligence of the system. From this definition, operating procedures can be generated to allow spacecraft technicians to operate the system, system protections are implemented that perform cable detection and mode verification, automated spacecraft fixture identification and related mode capability, and more.

Second, the PSTE is intended to negate the need for purchasing new power test equipment with each new spacecraft. With a review of current and future needs and industry trends, power resources can be sized to provide the optimal blend of flexibility and price.

The system also monitors and provides protection for the satellite electrical power systems against any damage by programming error or by system failure.

The following resources are available in the system pictured on the cover. In most cases, the hardware resources can be scaled to meet the customer's individual requirements.

AC Isolation transformers

• 75KVA power rating; Transform 480VAC 3phase Delta to 208VAC 3 phase Wye

Main Power Rack

• Five 10KW power channels; 150VDC at 67A each
• One 5KW load channel; 3-450V, 0-150A constant current
• Eight programmable strip chart recorder outputs

Solar Array Simulator

• 64 Channels with 110V Voc and 450W each

Electronic Load Rack

• Three 5KW load channel; 3-450V, 0-150A constant current

Remote User Interface

• Ruggedized Portable PC with operator interface software

System Verification test Fixture

• Customized for individual spacecraft I/O to allow convenient, manual verification of power setup.

Hardware Overview

In this section, the overall system is first represented by a simplified block diagram along with a general discussion of the function of each equipment rack. After which, each rack of equipment is represented by its own block diagram. Each rack block diagram is supported by a discussion of the equipment in the rack.

Either the Remote User Interface (RUI) or the Remote Operating System (ROS) is the source of control, or Computer in Charge (CIC), at any given time, at the operator's discretion. The ROS is supplied by the user. The CIC communicates directly with the system controller in the MPR (MPR controller), and the entire system is controlled via the MPR Controller.

Diagnostics and Troubleshooting can be accomplished directly from the MPR controller. The Main Power Rack (MPR) provides main bus power for tests from up to five internal power sources. The Solar Array Simulator (SAS) provides solar panel simulation power. The Spacecraft Protection Unit (SPU) further protects the spacecraft from damage in case of failure of the built-in OVP/OIP protection of the rest of the PSTE system. For electrical system loading tests, the Electronic Load Rack (ELR) provides three programmable Electronic Load Units (ELU). The MPR contains an ELU that can be used when only one ELU is required.

ZAR -1

Franklin Electric INCON 1250 LTC

sku Product SKU:  FRA-1250-LTC-U-W-Y

The 1250-LTC is designed specifically for transformer LTC position monitoring. Its hardware is the same as the 1250B with the addition of Input Isolation, Serial Port and Relay inputs which provide enhanced analysis of LTC position.

ZAR -1

Franklin Electric Gridsense Line IQ

sku Product SKU:  FRA-LIQ

LineIQ provides basic line fault indication, as well as intelligent remote monitoring. Basic fault indicators point only to the initial (primary) faults; however, intelligent monitoring helps utilities more quickly isolate faults and restore power through recording real-time data on true voltage, fault waveform, load profile, line status and condition, ambient and conductor temperature, and through providing time-stamped event recordings.

ZAR -1

Franklin Electric Celltron Advantage Digital

sku Product SKU:  FRA-CAD

The CELLTRONTM Advantage Digital is a fast, user-friendly, premium handheld tester for measuring battery conductance, voltage, temperature and strap resistance in high-noise environments for a complete battery state-of-health analysis. With the capability to test Valve Regulated Lead Acid (VRLA), Vented Lead Acid (VLA), and Nickle Cadmium (Ni-Cd) batteries, the CELLTRONTM Advantage Digital can measure battery voltage down to one (1) volt as well as measure inter-cell and terminal connection resistance.

ZAR -1

Franklin Electric Celltron Ultra

sku Product SKU:  FRA-CTU-6000-KIT

Built upon experience and proven technology, the CELLTRON Ultra offers advanced battery testing capabilities for effective evaluation and maintenance of all stationary power systems, including uninterruptible power supplies in data center environments with high levels of electrical interference noise (UPS systems), power utility, telecommunications industries and is ideal for use in data centers or other environments with high levels of electrical interference noise.

ZAR -1

100-ST Series

sku Product SKU:  BIR-100-ST-Series

100-ST Series, RF Terminations are world renowned for their high-quality, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI.

ZAR -1

Fluke Calibration 9190A-X Ultra-Cool Field Metrology Well

sku Product SKU:  FCAL-9190A

The Fluke Calibration 9190A Ultra-Cool Field Metrology Well is the most accurate and stable, cold temperature dry-block on the market. It’s ideal for applications that demand strict quality control and regulatory process compliance. These applications include on-location validation and calibration of RTDs, thermocouples, thermometers, and sensors used with process control equipment such as medical freezers, laboratory refrigerators, cold rooms, blood banks, sterilizers (autoclaves), and freeze dryers.

ZAR -1

100-6T Series

sku Product SKU:  BIR-100-6T-Series

100-6T Series, RF Terminations are world renowned for their high-quality, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI.

ZAR -1

100-T Series

sku Product SKU:  BIR-100-T-Series

100-T Series, RF Terminations are world renowned for their high-quality, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI.

ZAR -1

100-CT Series

sku Product SKU:  BIR-100-CT-Series

100-CT Series, RF Terminations are world renowned for their high-quality, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI.

ZAR -1

100-A Series

sku Product SKU:  BIR-100-A Series

100-A Series, 100 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quailty, robust construction and conservative power ratings.

ZAR -1

100-6A Series

sku Product SKU:  BIR-100-6A Series

100-6A Series, 100 Watt RF Power Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quailty, robust construction and conservative power ratings.

ZAR -1