Fluke Calibration 3130 Portable Pressure Calibrator

sku Product SKU:  FCAL-3130

The Fluke 3130 Portable Pneumatic Pressure Calibrator is ideal for calibrating pressure transmitters, transducers, gauges and similar devices. The Fluke 3130 contains everything you need to generate, control and measure pressure, as well as read the output of the device under test (DUT).

ZAR -1

Fluke Calibration P5510/P5513-2700G Pneumatic Pressure Calibrators

sku Product SKU:  FCAL-P5510-P5513-2700G

The Fluke Calibration pneumatic calibrators are an easy-to-use alternative to traditional deadweight testers. These pressure calibrators are conveniently bundled with up to six 2700G Reference Pressure Gauges for a complete, benchtop pressure calibration solution to provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.

ZAR -1

Fluke Calibration P5514/P5515-2700G Hydraulic Pressure Calibrators

sku Product SKU:  FCAL-P5514/P5515-2700G

Fluke Calibration hydraulic calibrators are an easy-to-use alternative to traditional deadweight testers. These pressure calibrators are conveniently bundled with up to six 2700G Reference Pressure Gauges for a complete, benchtop pressure calibration solution to provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.

ZAR -1

Fluke Calibration 3990

sku Product SKU:  FCAL-3990

The Series 3990 Manual Pressure Control Pack provides a convenient means of manually adjusting pressure to both the device under test and a calibration standard such as a gas piston gauge or digital pressure indicator.

The two models available are with full scales of 7 MPa (1000 psi) and 20 MPa (3000 psi).

ZAR -1

Fluke Calibration P5510

sku Product SKU:  FCAL-P5510

The Fluke Calibration P5510 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5510 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.

For example, the P5510-2700G-3 is a P5510 Pressure Comparator, bundled together with 2700G-BG2M, 2700G-BG700K, 2700G-BG100K. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –15 psi to 300 psi (–100 kPa to 2 MPa).

The accuracy of the calibrator is equal to the accuracy of the 2700G Reference Pressure Gauge being used: ±0.02% full scale of positive pressure or ±0.05% of full scale for vacuum.

ZAR -1

Fluke Calibration P5513

sku Product SKU:  FCAL-P5513

The Fluke Calibration P5513 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5513 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.

For example, the P5513-2700G-3 is a P5513 Pressure Comparator, bundled together with 2700G-G20M, 2700G-BG7M, 2700G-BG700K. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –12 psi to 3000 psi (–80 kPa to 20 MPa).

The accuracy of the calibrator is equal to the accuracy of the 2700G Reference Pressure Gauge being used: ±0.02% full scale of positive pressure or ±0.05% of full scale for vacuum.

ZAR -1

Fluke Calibration 6531/6532

sku Product SKU:  FCAL-6531/6532-E-DWT

Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

• No weights to load and unload, transport or send out for calibration
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next

 The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

ZAR -1

Fluke Calibration E-DWT-H

sku Product SKU:  FCAL-E-DWT-H

E-DWT-H breaks new ground in dead weight tester calibration, improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical, piston-cylinder and weight based deadweight testers. It’s a lighter, easier-to-use deadweight tester calibration alternative that is at home in the lab or instrument shop, as well as in the field performing in-situ calibrations and tests. This complete hydraulic pressure calibration system combines the convenience and precision of continuous, realtime electronic pressure measurement with the simple and direct operation of high quality operator controlled pressure generation hardware. E-DWT-H one year measurement uncertainty is ± 0.02 % of reading with ranges up to 30,000 psi. It can be configured to provide this uncertainty from its full scale down to 1 % of its range. Built-in pressure generation and control hardware allow the operator to fill and prime the system under test and generate and precisely adjust pressure throughout the range with ease.

Broad workload coverage

The E-DWT-H has the operational versatility to calibrate and test a broad range of pressure measuring instruments including:

• Analog gauges
• Transducers
• Calibrators
• Sensors
• Transmitters

AutoTest™ lets E-DWT operators quickly define test points and adjust all of the range-dependent settings with a single function.
The resolution and stability test used by the RPM4-E-DWT are set according to the range of the device under test. The upper limit setting is also set and provides range-based warnings and overpressure protection. While running AutoTests, the operator is prompted to set each sequential test point and test data is stored in the RPM4-E-DWT for recall or download. Typical test setup is quick and easy, but more complex tests can also be stored and reused.

Deadweight tester calibration performance with digital measurement convenience
E-DWT-H offers precision, low measurement uncertainty and the stability over time of a conventional deadweight tester without the inconveniences associated with the piston-cylinders, weights, hand pumps, and interconnecting plumbing.

Versatility to cover a broad workload in a variety of environments
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It operates with Sebacate calibration fluid, mineral oil, Skydrol® and other liquids. An optional battery/charger pack supports up to eight hours of operation away from line power.

• No weights to load and unload or regularly send out for calibration
• No need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes; switch Q-RPT ranges in seconds
• Not sensitive to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses
• Operates in any unit of measure while deadweight tester is typically limited to the pressure unit stamped on the mass
• Perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• On-board, AutoTest calibration routines and data acquisition
• Interfaceable with a PC or laptop to allow for automated data acquisition
• Two year calibration interval supported at measurement uncertainty of ± 0.025% of reading.
• Easily recalibrated without crossfloating. Automated calibration of E-DWT-H is possible using COMPASS® for Pressure software.

ZAR -1

Fluke Calibration MET/CAL® Calibration Management Software

sku Product SKU:  FCAL-METCAL-Software

Fluke Calibration MET/CAL® Warranted Calibration Procedures

sku Product SKU:  FCAL-METCAL-Warranty

MET/CAL® warranted procedures are optional calibration procedures for MET/CAL® Plus Calibration Software. This class of MET/CAL® procedures, produced by Fluke Precision Measurement engineers, is designed to satisfy your need for ready-to-go, fully tested calibration procedures.

MET/CAL® calibration procedures are warranted by Fluke Calibration to produce valid calibrations on the intended device under test (DUT) for the specified model and revision level. The warranty assures you of Fluke Calibration's full support for the original, unaltered procedure.

Once installed and operational, these procedures automate the calibration process under MET/CAL control as described in the DUT's service documentation. In many cases, multiple procedures are provided for each model to provide "verification only" and "adjustment" procedures. Multiple procedures also may be provided which give you a choice of different standards to perform the calibration.

ZAR -1

Franklin Electric INCON Optimizer 3

sku Product SKU:  FRA-INCO-OPTIMISER-3

The INCON® Optimizer3 Circuit Breaker Monitor delivers advanced automated reporting of all critical circuit breaker diagnostics to ensure uptime and facilitate predictive maintenance. The Optimizer3 is ideal for high-voltage, live or dead-tank, oil, vacuum or gas circuit breakers. 

ZAR -1

Franklin Electric INCON 1250B

sku Product SKU:  FRA-1250B-U-W-Y

The 1250B is a versatile programmable position monitor. Its main application is for Transformer LTC position monitoring, but its non-linear conversion table gives it the ability to convert non-linear rotary motion into a linear scale for additional applications.

ZAR -1

Franklin Electric INCON 1511 LTC

sku Product SKU:  FRA-1511-LTC-U-W-Y

The 1511-LTC provides basic LTC tap position monitoring using the LTC’s slide wire position feedback device. As the LTC changes taps, the moveable contact picks up the voltage divided through the resistors in the slide wire, so that each tap has its own specific voltage.

ZAR -1

Fluke Calibration MET/CONNECT™ Calibration Integration Software

sku Product SKU:  FCAL-METCAL-TESTEQUIPASSET-SOFTWARE

Ametek SGX Series

sku Product SKU:  AME-SGX-SERIES

The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.

Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.

ZAR -1

Ametek Asterion DC Series

sku Product SKU:  AME-ASTERION-DC-Series

The Sorensen Asterion line of DC power supplies by AMETEK Programmable Power combines intelligence and flexibility to create an advanced platform of DC solutions in 1.7, 3.4, 5.0 & 10kW. The new DC series features two types of product lines: fixed range and autoranging. The fixed range supplies are economical, traditional rectangular wave output power supplies with all the enhanced operation advantages standard with the Asterion platform. The autoranging supplies feature expanded current and voltage range at the full output power level, enabling the ability to satisfy a wider testing need without requiring the purchase of additional models.. Its groundbreaking capabilities set the standard for affordable, precision power supplies.
 

ZAR -1

Ametek HPX Series

sku Product SKU:  AME-HPX-Series

The Flexibility You Want with the Capability You Need in One System
The Sorensen HPX series serves every major market and application that requires demanding test specifications, from industrial automation to material research to aerospace and satellite testing – providing engineers the flexibility they want with the capability they need all in one convenient and affordable system. The Sorensen HPX High Power Extensible, Programmable DC Series delivers unsurpassed quality and reliable low-noise performance, fast and precise programmability with premium features, all in a convenient rack-mount cabinet with casters.

• High power configured the way you want for today’s testing and beyond
• Affordable system power with all the precision of expensive, custom solutions
• Serving every major market and application with demanding test specifications

Modular Architecture Benefits
* The Sorensen HPX system does not go down in the event that one of the power building blocks fails.
* Modularity allows more efficient maintenance as sparing can be done at the building block level.
* Intelligent controls allow for sophisticated sequencing, constant power mode to allow for independent settings of max voltage, current and power and save/recall of the supply settings.
* Flexible control includes front panel manual control, isolated analog input, RS232 and Ethernet (LXI) with an option to replace the Ethernet interface with IEEE-488.

ZAR -1

Ametek Asterion DC ASM series

sku Product SKU:  AME-ASTERION-DC-ASM-Series

The Sorensen™ Asterion® DC ASM Series is the newest addition to the Asterion platform of power testing solutions. The new ASM Series features up to three independent, isolated, fixed-range outputs in a 1U high chassis.

The Asterion DC ASM Series, just like the Asterion DC Series, offers complete remote programming and control via Virtual Panels™ GUI, and intuitive front panel touch screen operation. Additionally, the instrument can be controlled via standard LXI Ethernet, USB, and RS232 control interfaces, as well as through the optional GPIB control interface or isolated analog programming.

ZAR -1

Ametek PLW

sku Product SKU:  AME-PLW

Traditional DC Electronic Load Solutions are bulky and large in size. Most are offered with standard voltage, current and power ratings. In the automated test equipment (ATE) world, rack space is a highly coveted asset and application demands are constantly diversifying with new technology development.

AMETEK Programmable Power's PLW Series of “water-cooled” DC Electronic eLoads are capable of being custom-tailored to meet your specific application requirements. The PLW Series also offers a unique condensation protection design, the highest power density and current rating, as well as the widest selection of high-voltage models on the market.

ZAR -1

Ametek Solar Array Simulator (SAS)

sku Product SKU:  AME-SAS

A spacecraft solar array is subjected to large temperature excursions, varying insolation (the amount of sunlight falling on the array), mechanical changes and aging, which substantially effect both its short and long term performance. In order to test the spacecraft's power environment, a cost-effective solution for ground based testing is to utilize a solar array simulator.

The Elgar SAS system reproduces all possible solar array outputs, based on the wide variety of input conditions that an array faces, including orbital rotation, spin, axis alignment, eclipse events, beginning-of-life and end-of-life operation. The SAS also provides complete programmable control of all the parameters that shape the solar cell I/V output curve. By being able to accurately simulate solar panels under various space conditions with complete control, a system developer can comprehensively verify design margins and quickly test, in production, spacecraft power systems and their associated electronics.

Each Solar Array Simulator is a fully integrated, turn-key system complete with Windows NT graphical user interface and hardware control software. It can be remotely controlled and addressable as a single device when integrated into a customer's test system. This control is accomplished via a standard ethernet or optional GPIB interface using standard SCPI format commands.

As a very important consideration in spacecraft testing, discrete hardware protection systems are a standard part of every SAS. These include subsystems that can remove power at the output of the SAS in under 10 microseconds. Each SAS string has an electronic circuit breaker and relay disconnect, so faults are localized and minimize disruption of the last process. SAS systems have been designed and delivered ranging from desktop, 2 channel, R&D units to systems capable of controlling two 64 channel SAS systems simultaneously. AMETEK's Engineered Solutions Group can assist in defining special requirements and customize each system using a standard building block approach. This allows each customer to get exactly what id needed while minimizing costs.

ZAR -1

Ametek Battery Sting Simulator (BBS)

sku Product SKU:  AME-BSS

The Elgar Battery String Simulators (BSS) provide safe, reliable battery power for spacecraft testing. The broad range of features available ensures simulation capabilities for more than just two terminal power. It's the ideal solution for complete integrated system testing, not just battery elimination.

The BSS behavior is determined by a charge table, in spreadsheet format, specific for a battery topology and various battery conditions. Many charge tables can be stored on the computer hard drive for easy retrieval.

The BSS operates in two modes, static and dynamic. In the static mode, when a state-of-charge value is entered, the BSS will instantly produce the terminal voltage corresponding to that state-of-charge. Because of this programmable flexibility, time consuming discharge cycles of flight test batteries are eliminated. In the dynamic mode, once a state-of- charge start point is entered, the BSS will monitor the charge and discharge energies being impressed on the "battery" and modify the terminal voltage accordingly.

Single or dual battery pack simulator versions are available with discharge currents of up to 150A and charge currents of up to 50A per battery. In addition, optional sensor simulators (including thermistor, pressure transducer, and heater loads outputs) allow closed loop input to the Spacecraft Power Regulator for true battery emulation. As with the SAS systems, each Battery Simulator System is a fully integrated, turn-key system using a Windows Graphical User Interface and hardware control software. This control is accomplished via a standard ethernet or optional GPIB interface using standard SCPI format commands.

ZAR -1

Ametek Avionics ATE Power Subsystem

sku Product SKU:  AME-Avoinics-ATE-Power-Subsystem

Power Subsystem for Transportable Military test stand

• Provides eight channels of programmable DC power with output isolation function
• Output disconnect function
• Total control via Ethernet within power supply.
• Mounted in custom in transportable shock-mount case.

ZAR -1

Fluke 8558A 8.5 Digital Multimeter

sku Product SKU:  FCAL-8558A-8.5

910/910R GPS Frequency Standards

sku Product SKU:  FCAL-910-910R

The 910 and 910R GPS frequency references are fully traceable and extremely accurate gps frequency standards and are ideally suited for use in many applications, including telecommunications, calibration and automatic test systems.

Both the 910 and 910R deliver a precision frequency and pulse-per-second time reference which, with its many connectivity options, can be installed, monitored and managed from virtually any location. Both models receive their long-term frequency stability from the built-in cesium standards in the GPS-satellite array, yet can also provide a very high short-term stability from the built-in oven controlled crystal oscillator (OCXO) or rubidium oscillator (Rb).

ZAR -1