Make critical power quality and energy decisions in real-time with Fluke 1746 and 1748 Power Quality Loggers. Designed with the flexibilty to troubleshoot, quantify energy usage and analyse power distribution systems the Fluke 1740 Series is Fully compliant with international power quality standards such as IEC 61000-4-30 and capable of simultaneously logging up to 500 parameters while also capturing events. Uncover intermittent and hard-to-find power quality issues easier than ever and quickly assesses power quality at the service entrance, substation, or at the load.

MDO-2000E series is equipped with a dual channel 25 MHz arbitrary waveform generator.
We could utilize arbitrary waveform generator to output waveforms and conduct frequency domain analysis by the built-in spectrum analyzer.

Start your proactive maintenance now with the Fluke 805 FC Vibration Meter: just push the tester against the machine and get a repeatable pass/fail result within a few seconds!

A portable calibration bath with four times more calibration throughput and twice the accuracy of Micro-Baths and dry-block calibrators.

Go here to learn more and request a quote: http://bit.ly/2rrlJDm

Fluke laser levels. Built with the ruggedness you expect from Fluke. Tested to survive a one meter drop.
Learn more on the Fluke web site - www.fluke.com/laserlevels

Midtronics MDX-P300

+ มีเครื่องพิมพ์ในตัวสามารถพิมพ์ผลการทดสอบได้ทันที
+ สามารถแก้ไขหัวกระดาษของผลการทดสอบได้ เช่น ใส่ชื่อร้านที่ผลทดสอบได้
+ สำหรับทดสอบแบตเตอรี่ระบบ 12 Vdc
+ สามารถทดสอบระบบการสตาร์ทเครื่องยนต์และการประจุไฟได้ในตัวเดียวกัน
+ ทดสอบแบตเตอรี่ได้ตั้งแต่ค่ากระแสสตาร์ท (CCA) ตั้งแต่ 100 - 1400 CCA
+ สามารถตรวจสอบหาการเสียของเซลแบตเตอรี่ได้
+ ไม่เกิดความเสียหายกรณีต่อสายวัดผิดขั้ว
+ ทดสอบได้แม้แรงดันแบตเตอรี่ลดต่ำลงเหลือ 1 volt
+ สามารถวัดได้ทุกมาตรฐานทั้ง CCA, SAE, DIN, EN, IEC, JIS#
+ ทดสอบได้ทั้งแบตเตอรี่น้ำ, AGM และ GEL
+ มีภาษาให้เลือกทั้ง อังกฤษ และภาษาญี่ปุ่น
+ ความแม่นยำสูง

สอบถามข้อมูลเพิ่มเติมได้ที่
คุณสัญญา ตรีวิบูลย์วณิชย์
โทร. 089-0783226 , 093-2969241

BATTERY CLINIC LIMITED PARTNERSHIP
341/7 หมู่ 2 ถนนปานวิถี
ตำบลบางบ่อ อำเภอบางบ่อ
จังหวัดสมุทรปราการ 10560
Email : batteryclinic-th@hotmail.com

ดูข้อมูลเพิ่มเติมได้ที่
http://www.siambig.com/shop/index.php?shop=battery-clinic

Please support my content creation by using my Amazon Store:
http://astore.amazon.com/m0711-20
--------------------- Click "Show more" -------------------------------
Multimeter tutorial - This series of videos is a tutorial on how to use a digital multimeter for beginners. It will also explain the basics of electricity and address some safety issues.
--------------------- Click "Show more" -------------------------------
My website and forum:- http://www.mjlorton.com
Donations and contributions:- http://www.mjlorton.com
My techie channel MJLorton - Solar Power and Electronic Measurement Equipment - http://www.youtube.com/MJLorton
My Techie Amazon Store: http://astore.amazon.com/m0711-20
My other channel VBlogMag - For almost any topic under the sun! - http://www.youtube.com/VBlogMag
My VBlogMag Amazon Store: http://astore.amazon.com/vblogmag-20
-----------------------------------------------------------------------

This third video covers how to measure resistance and continuity.

I also discuss why power is transmitted from power stations using AC as apposed to DC.

I use a Fluke 177 multimeter for this demonstration provided by Comtest: www.ComTest.co.za

A list of my multimeters can be purchased here:
http://astore.amazon.com/m0711-20?_encoding=UTF8&node=5

Items covered in this multimeter tutorial series:
* Multimeter safety
* How to measure current; how to measure a car battery / lead acid battery; how to measure mains electricity / power outlet / 220 volt / 110 volt.
* What is electricity; how does electricity work; what is voltage; what is current / amps / ampage / ampere.
* Continuity and resistance, trouble shooting a circuit.

Please support my content creation by using my Amazon Store:
http://astore.amazon.com/m0711-20
--------------------- Click "Show more" -------------------------------
Multimeter tutorial - This series of videos is a tutorial on how to use a digital multimeter for beginners. It will also explain the basics of electricity and address some safety issues.

My website and forum:- http://www.mjlorton.com
Donations and contributions:- http://www.mjlorton.com
My techie channel MJLorton - Solar Power and Electronic Measurement Equipment - http://www.youtube.com/MJLorton
My Techie Amazon Store: http://astore.amazon.com/m0711-20
My other channel VBlogMag - For almost any topic under the sun! - http://www.youtube.com/VBlogMag
My VBlogMag Amazon Store: http://astore.amazon.com/vblogmag-20
-----------------------------------------------------------------------

This this second video covers how to measure DC current.

I also discuss AC (alternating current) and DC (direct current) voltage and which one can be more dangerous.

I use a Fluke 177 multimeter for this demonstration provided by Comtest: www.ComTest.co.za

A list of my multimeters can be purchased here:
http://astore.amazon.com/m0711-20?_encoding=UTF8&node=5

Items covered in this multimeter tutorial:
* Multimeter safety
* How to measure current; how to measure a car battery / lead acid battery; how to measure mains electricity / power outlet / 220 volt / 110 volt.
* What is electricity; how does electricity work; what is voltage; what is current / amps / ampage / ampere.

*** This is a follow-up to the first round of testing I did as viewers spotted / pointed out some critical issues that affected the results ***

I also test the Fluke 87 V with the reference voltage, resistance and current values.

I demonstrate the DMMCheck and PentaRef from VoltageStandard (www,voltagestandard.com).
Digital Multimeter reference / accuracy check

These are Low cost Voltage References and multimeter checks for voltage, current and resistance.
I then run through some tests to compare the accuracy of the following multimeters:

Fluke 287
Brymen TBM867 / BM867
Major Tech MT1887 / Extech EX530
Major Tech MT22
ISO-Tech IDM207

I also introduce the Fluke 87 V which I will review soon.

A list of my multimeters can be purchased here:
http://astore.amazon.com/m0711-20?_encoding=UTF8&node=5

I demonstrate the DMMCheck and PentaRef from VoltageStandard (www.voltagestandard.com).
These are Low cost Voltage References and multimeter checks for voltage, current and resistance.
I then run through some tests to compare the accuracy of the following multimeters:

Fluke 287
Brymen TBM867 / BM867
Major Tech MT1887 / Extech EX530
Major Tech MT22
ISO-Tech IDM207

I also introduce the Fluke 87 V which I will review soon.

A list of my multimeters can be purchased here:
http://astore.amazon.com/m0711-20?_encoding=UTF8&node=5